 | 1-14" X 3/8"TH X 96"L, Red Oak, Machine Carved Hard Wood Fluted Molding. (Zakros Moulding) Brand: Zakros Designs Part Number: MK826 Red Oak, Machine Carved Fluted Molding. The product is designed to achieve the highest degree of quality and details, tripple sanded in each product. ***For more Options, Please go to Other Products by Zakros Designs above in this page, or go to our website or Call 626-856-9282 for any questions.*** | *$10.00 |
 | 1-3/4" DIA X 96"L. HALF-ROUND, Red Oak, Machine Carved Hard Wood Rope Molding, (Zakros Moulding) Brand: Zakros Designs Part Number: RK1-3/4 Red Oak. HALF-ROUND, Machine Carved Rope Molding. The product is designed to achieve the highest degree of quality and details, tripple sanded in each product. ***For more Options, Please go to Other Products by Zakros Designs above in this page, or go to our website or Call 626-856-9282 for any questions.*** | *$28.00 |
 | 1-3/4" Stair Edging - 73304 1X72 Bs Stair Edging Tal Brand: Md Building Products Inc Part Number: 73304 1-3/4" Stair Edging - 1-3/4" STAIR EDGING. Use for indoor or outdoor carpet & stairs. 727F-fluted. Fasten with screw nails | *$22.68 |
 | 1-3/4'' Cherry Veneer Flat Picture Frame Molding Brand: Rockler Create stunning picture frames for artwork, photography or prints. 4' length molding lets you make whatever size frame you need. | *$19.99 |
 | 1-3/4'' Long x 7/8'' Diameter Maple (photo, right) Brand: Rockler Maple gallery spindles with beautiful details! Hard maple spindles, smoothly sanded and ready for finishing. Use on plate rails, spice racks and headboards. 8 per pack. Tenon diameter is 3/8" for all of them.Note: Length does not include tenon. | *$5.59 |
 | 1-3/8X3' PLSHD CRPT TRIM (M-D Building Products 66092) Brand: M-D Model: 66092 Part Number: 66092 - Aluminum floor and carpet trim - Smooth - Screw nails included - Polished finish - 1/6" thickness - 1-1/2" wide - 36" length | *$3.67 |
 | 1-7/8"W X 1"TH X 96"L (Repeat 11"), Hand Carved REED & RIBBON Hard Wood Molding, (Zakros Moulding) Brand: Zakros Designs Part Number: MW951 WhiteWood, Hand Carved REED & RIBBON Molding. The product is designed to achieve the highest degree of quality and details, tripple sanded in each product. ***For more Options, Please go to Other Products by Zakros Designs above in this page, or go to our website or Call 626-856-9282 for any questions.*** | *$29.99 |
 | 1-7/8'' Long x 13/16'' Diameter Maple (photo, left) Brand: Rockler Maple gallery spindles with beautiful details! Hard maple spindles, smoothly sanded and ready for finishing. Use on plate rails, spice racks and headboards. 8 per pack. Tenon diameter is 3/8" for all of them.Note: Length does not include tenon. | *$5.59 |
 | 1-7/8'' Long x 9/16'' Diameter Maple (photo, center) Brand: Rockler Maple gallery spindles with beautiful details! Hard maple spindles, smoothly sanded and ready for finishing. Use on plate rails, spice racks and headboards. 8 per pack. Tenon diameter is 3/8" for all of them.Note: Length does not include tenon. | *$4.59 |
 | 1-9/16" x 48" Poplar Curtain / Closet Dowel Rods 3/pack [CAPITOL CITY LUMBER] Brand: CAPITOL CITY LUMBER This product is a full round solid Poplar unfinished dowel that measures 1-9/16 inch in diameter by 4 foot tall. There are 3 dowels per pack. Please contact us at 1-800-244-6492 with any questions on this product or other products on our website. ***RETURN POLICY***: If for any reason you are not completely satisfied, please return this product within 30 days of receiving and we will give you full credit back. It is the customer s responsibility to pay for the return postage of any products unless the product is damaged during original shipment. Please contact us at 1-800-244-6492 if you are making a return or have any questions regarding returns. Provide for us your name and order number to assist us with processing your request. ***ABOUT THE SELLER***: Capitol City Lumber Company is a unique lumber and hardware retail store. We cater to a wide array of customers from the do-it-yourselfers, homeowners, and remodelers to the small to large-size contractors. We specialize in having a vast array of lumber, building materials and hardware, often times the hard to find items. Our company was started in 1947 and we are still known as an ole timey lumber company by local customers. We believe in a policy of fair pricing, quality products and dependable service. Our store location is located at 4216 Beryl Road in Raleigh, North Carolina, near the NC State fairgrounds. | *$26.70 |
 | 1-qt. Hydraulic Jack Oil (442-30522) Category: Hydraulic Oils Brand: Loctite Item #: 442-30522. Non-corrosive oil improves lubrication in all types of hydraulic units (except hydraulic brakes)<br>Contains antioxidant, anti-rust, and anti-wear additives <p><ul><li>Packing Type = Can<li>Temp. Range = 120.0 øF [Max]<li>Capacity Volume = 1 qt<li>Applicable Materials = Aluminum, Cadmium, Copper, Magnesium Alloy, Steel<li>Color = Amber<li>Odor = Mild Petroleum<li>Resistance = Corrosive Process, Moisture, Water<li>Type = Hydraulic Jack Oil</ul> <br>Customers also search for: Discount 1-qt. Hydraulic Jack Oil, Buy 1-qt. Hydraulic Jack Oil, Wholesale 1-qt. Hydraulic Jack Oil, 079340305229, 30522, Hydraulic Oils | *$5.13 |
 | 1.5" Transporter Lift Magnet Brand: Industrial Magnetics, Inc. Part Number: TPLP15 The Low Profile Transporter® LP magnetically transfers metal blanks, stampings and parts in automated station to station, press-to-press transfer and robotic pick and place systems. Typical applications include stamped parts, tailor welded blanks, body panels and refrigerator door panels.
The Transporter® LP is designed to directly replace vacuum cups with minor tooling and valve adjustments. Powerful Rare Earth magnets positively hold the parts during transfer, greatly reducing the chance of slipping and shifting of your part due to oily coatings. An optional "low-skid" boot is also available to increase grip on parts during transfer. A short burst of shop air pressure is applied in order to release parts. To pick-up or grip parts, the air pressure must be exhausted to the atmosphere. | *$282.00 |
 | 1.5" Transporter Lift Magnet (Non-Rotating) Brand: Industrial Magnetics, Inc. Part Number: TPLP15NR The Low Profile Transporter® LP magnetically transfers metal blanks, stampings and parts in automated station to station, press-to-press transfer and robotic pick and place systems. Typical applications include stamped parts, tailor welded blanks, body panels and refrigerator door panels.
The Transporter® LP is designed to directly replace vacuum cups with minor tooling and valve adjustments. Powerful Rare Earth magnets positively hold the parts during transfer, greatly reducing the chance of slipping and shifting of your part due to oily coatings. An optional "low-skid" boot is also available to increase grip on parts during transfer. A short burst of shop air pressure is applied in order to release parts. To pick-up or grip parts, the air pressure must be exhausted to the atmosphere. | *$309.00 |
 | 1/2 CLEVIS GRAB HOOK Box Qty. / 1 Brand: The Nutty Company 1/2 CLEVIS GRAB HOOK Box Qty. / 1 | *$15.10 |
 | 1/2 Cu Yd Stainless Steel Heavy Duty Self Dumping Forklift Hopper Brand: MC CULLOUGH INC Part Number: SS5077 WRIGHT SELF DUMPING STAINLESS STEEL FORKLIFT HOPPER Engineered for safety and economy. 304 stainless steel hoppers are perfectly balanced to roll forward when loaded, dump completely and automatically return to upright, locked position ready for reloading. Continuous welding helps to prevent leaking or dripping of wet materials. Formed smooth edge around top and pouring lip for safety and strength. Extended sides prevent side-wise scattering of material. Stacking feature is standard on this model and permits stacking of empty hoppers. Strong, easy-to-operate chrome latching mechanism and chrome pins. | *$2,959.00 |
 | 1/2 Cu Yd Yellow Heavy Duty Self Dumping Forklift Hopper With Heavy Gauge Base Brand: MC CULLOUGH INC Part Number: 5099YL WRIGHT SELF DUMPING STEEL FORKLIFT HOPPER Engineered for safety and economy. Hoppers are perfectly balanced to roll forward when loaded, dump completely and automatically return to upright, locked position ready for reloading. Continuous welding helps to prevent leaking or dripping of wet materials. Formed smooth edge around top and pouring lip for safety and strength. Extended sides prevent side-wise scattering of material. Stacking feature is standard on this model and permits stacking of empty hoppers. Strong, easy-to-operate latching mechanism. Factory Installed Upgrades available at the time you order: Legs for pallet truck access Chain Latch for dumping at extreme heights Lifting Lugs for overhead crane use 3-Way Entry Base allows forklift access | *$649.00 |
 | 1/2 IN Cherry Screw Hole Buttons Brand: Restoration Center Round Head Buttons With Shoulders Turned End Grain Cherry 1/2" dia 50 pieces. | *$6.25 |
 | 1/2 IN Maple Flat Top Plugs Brand: Restoration Center Turned End Grain Tapered Flat Top Maple 1/2" dia 50 pieces | *$3.95 |
 | 1/2 IN Maple ROPE Wood Molding-Half Round Brand: Restoration Center Maple 1/2"w x 1/4" thick wood molding. Sold by the liniar foot. | *$3.25 |
 | 1/2 IN Walnut Flat Top Plugs Brand: Restoration Center Turned End Grain Tapered Flat Top Walnut 1/2" dia 50 pieces. | *$2.99 |
 | 1/2 IN Walnut Screw Hole Buttons Brand: Restoration Center Round Head Buttons With Shoulders Turned End Grain Walnut 1/2" dia 50 pieces. | *$4.59 |
 | 1/2 Oak SIDE GRAIN Plugs-Flat Top Brand: Restoration Center Side Grain Tapered Flat Top Furniture Grade Oak 1/2" dia. 50 pieces. | *$7.89 |
 | 1/2 Ton Cm Hurricane Chain Hoist with 8' Lift Brand: CM Model: 5600 Part Number: 5600 'The CM Hurricane hand chain hoist is an economical, high-quality, rugged unit with features unique to a hoist of this class. Designed with fewer parts to assure long life and minimal maintenance, this hoist can be used to lift loads in numerous industrial, construction and commercial applications. Unique single disc brake design does not incorporate a ratchet pawl or pawl springs as do other hand chain hoists. Fewer parts means less wear and low maintenance. Handwheel cover rotates 360 degrees for hoist operation in any direction. Ideal for special rigging applications. Frame and housings are made from impact resistant, stamped steel for long life, with powder coated finish for corrosion protection. All internal gears and pinions are heat treated steel, high quality bushings and sealed ball bearings are used throughout. Chain guide and stripper assure load chain alignment. Precision 4-pocket liftwheel, fully machined for better chain fit and reduced wear. Hardened steel chain, high strength forged upper and lower hooks with heavy duty cast steel latches. Minimal maintenance -- easily disassembled, requiring no special tools. 5-year warranty against defects in materials and workmanship. Meets ASME B30.16 Overhead Hoist Standard and European CE Standard. Metric Rated. Specifications: Rated Capacity: 1/2 Ton; Standard Lift (Can be supplied with other lifts): 8'; Hand Chain Pull to Lift Rated Load: 47 lbs.; Hand Chain Overhaul to Lift Load 1 ft.: 30' | *$189.00 |
 | 1/2 Ton Hydraulic Telescopic Transmission Jack 70-7/8" Brand: Generic | *$199.99 |
 | 1/2 Wal SIDE GRAIN Plugs-Flat Top Brand: Restoration Center 2 1/2"long x 1 1/4"w Statuary Bronze Finish KEYS SOLD SEPARATELY (Choice of Keys - B-1910, N-1910, M-1921, AB-1941, or B-1980) 50 pieces. | *$9.25 |
 | 1/2 X 1 1/2 Lag Screws / Hex Head / 18-8 Stainless Steel / 50 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 198787 1/2 X 1 1/2 Lag Screws / Hex Head / 18-8 Stainless Steel | *$62.39 |
 | 1/2 X 1 1/2 Lag Screws / Hex Head / Steel / Zinc / 200 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 198774 1/2 X 1 1/2 Lag Screws / Hex Head / Steel / Zinc | *$52.77 |
 | 1/2 X 1 1/4 Lag Screws / Hex Head / Steel / Zinc / 300 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 403322 1/2 X 1 1/4 Lag Screws / Hex Head / Steel / Zinc | *$73.14 |
 | 1/2 X 1 3/4 Lag Screws / Hex Head / 18-8 Stainless Steel / 50 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 304209 1/2 X 1 3/4 Lag Screws / Hex Head / 18-8 Stainless Steel | *$67.87 |
 | 1/2 X 1 3/4 Lag Screws / Hex Head / Steel / Zinc / 200 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199061 1/2 X 1 3/4 Lag Screws / Hex Head / Steel / Zinc | *$59.68 |
 | 1/2 X 1 Lag Screws / Hex Head / Steel / Zinc / 300 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 403313 1/2 X 1 Lag Screws / Hex Head / Steel / Zinc | *$68.46 |
 | 1/2 X 1-1/2 GALV. LAG BOLT Box Qty. / 25 Brand: The Nutty Company 1/2 X 1-1/2 GALV. LAG BOLT Box Qty. / 25 | *$12.00 |
 | 1/2 X 10 GALV. LAG BOLT Box Qty. / 1 Brand: The Nutty Company 1/2 X 10 GALV. LAG BOLT Box Qty. / 1 | *$2.00 |
 | 1/2 X 10 LAG BOLT ZINC Box Qty. / 1 Brand: The Nutty Company 1/2 X 10 LAG BOLT ZINC Box Qty. / 1 | *$2.10 |
 | 1/2 X 10 Lag Screws / Hex Head / Steel / Hot Dip Galvanized / 25 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 197724 1/2 X 10 Lag Screws / Hex Head / Steel / Hot Dip Galvanized | *$66.14 |
 | 1/2 X 10 Lag Screws / Hex Head / Steel / Zinc / 40 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 197713 1/2 X 10 Lag Screws / Hex Head / Steel / Zinc | *$57.24 |
 | 1/2 X 11 Lag Screws / Hex Head / Steel / Zinc / 30 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 198046 1/2 X 11 Lag Screws / Hex Head / Steel / Zinc | *$47.41 |
 | 1/2 X 12 LAG BOLT ZINC Box Qty. / 1 Brand: The Nutty Company 1/2 X 12 LAG BOLT ZINC Box Qty. / 1 | *$2.60 |
 | 1/2 X 12 Lag Screws / Hex Head / Steel / Hot Dip Galvanized / 25 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 198141 1/2 X 12 Lag Screws / Hex Head / Steel / Hot Dip Galvanized | *$76.78 |
 | 1/2 X 2 1/2 Lag Screws / Hex Head / 18-8 Stainless Steel / 50 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199898 1/2 X 2 1/2 Lag Screws / Hex Head / 18-8 Stainless Steel | *$86.73 |
 | 1/2 X 2 1/2 Lag Screws / Hex Head / Steel / Hot Dip Galvanized / 100 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199902 1/2 X 2 1/2 Lag Screws / Hex Head / Steel / Hot Dip Galvanized | *$57.92 |
 | 1/2 X 2 1/2 Lag Screws / Hex Head / Steel / Zinc / 100 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199883 1/2 X 2 1/2 Lag Screws / Hex Head / Steel / Zinc | *$37.60 |
 | 1/2 X 2 1/4 Lag Screws / Hex Head / Steel / Zinc / 200 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 403338 1/2 X 2 1/4 Lag Screws / Hex Head / Steel / Zinc | *$68.67 |
 | 1/2 X 2 GALV. LAG BOLT Box Qty. / 25 Brand: The Nutty Company 1/2 X 2 GALV. LAG BOLT Box Qty. / 25 | *$13.20 |
 | 1/2 X 2 LAG BOLT ZINC Box Qty. / 25 Brand: The Nutty Company 1/2 X 2 LAG BOLT ZINC Box Qty. / 25 | *$9.80 |
 | 1/2 X 2 Lag Screws / Hex Head / 18-8 Stainless Steel / 50 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199357 1/2 X 2 Lag Screws / Hex Head / 18-8 Stainless Steel | *$73.36 |
 | 1/2 X 2 Lag Screws / Hex Head / Steel / Hot Dip Galvanized / 100 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199360 1/2 X 2 Lag Screws / Hex Head / Steel / Hot Dip Galvanized | *$52.57 |
 | 1/2 X 2 Lag Screws / Hex Head / Steel / Zinc / 200 Pc. Carton Brand: Fastener SuperStore, Inc. Part Number: 199340 1/2 X 2 Lag Screws / Hex Head / Steel / Zinc | *$64.20 |
 | 1/2 X 2-1/2 GALV. LAG BOLT Box Qty. / 25 Brand: The Nutty Company 1/2 X 2-1/2 GALV. LAG BOLT Box Qty. / 25 | *$15.20 |
 | 1/2 X 2-1/2 LAG BOLT ZINC Box Qty. / 25 Brand: The Nutty Company 1/2 X 2-1/2 LAG BOLT ZINC Box Qty. / 25 | *$11.60 |