 | Brand Hydraulics Side-Ported Adjustable Flow Control Valve - #12 SAE ports, 0-30 GPM, Relief Valve, Model# PFCR51-12SAE
Brand: Brand Hydraulics
Brand Hydraulics side-ported adjustable flow control valve will start or stop a hydraulic cylinder or motor and vary speed over wide range. Once set, maintains constant speed regardless of load variation. Excess flow is returned to tank or used to power another function. Internal relief valve. U.S.A. | *$74.99 |
 | 1 1/16 Bore x 5. Stroke, Double Acting, Nose Mount, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-125
1-1/16" Bore | *$37.36 |
 | Westward 1MZJ4 Hydraulic Shop Press, 25 Ton
Brand: WestWard Tools
Hydraulic Shop Press, Frame Capacity 25 Tons, Ram Travel 6 In, Hose Size 1/4 In Inner Diameter x 6 Inches, Base Length 28 In, Base Width 28 In, Pump Type Hand Pump, Working Width 20 In, Overall Height 59 In, 2 1/2 To 34 1/4 In Range of Working Space Allows a Variety of Uses, Includes Hydraulic Hand Pump, Cylinder, and Hose | *$1,216.00 |
 | 1/2 Bore x 1 1/2 Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-55
1/2" Bore Universal Mount Double Acting | *$19.63 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=1,650 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-1650 | *$233.52 |
 | De-Sta-Co Hydraulic Power Workholding, Jam Nut, B=2 5/8-20 (1 Each)
Brand: De-Sta-Co Part Number: 051-262-200 | *$30.67 |
 | Northman Fluid Power In-Line Hydraulic Relief Valve - 50 GPM, 500-2000 PSI Adjustable, 3550 PSI, 3/4in. NPT Ports, Model# RFT062
Brand: Northman Fluid Power
This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. | *$89.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 010-021-114 | *$160.60 |
 | 1/2 NPT, 2.31 Lg. Open, 7/8 Hex., Parker Muffler / Speed Controls (1 Each)
Brand: Reid Supply Company Part Number: MFP-332
Muffler/Speed Control | *$20.47 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve - 8 GPM, 3000 PSI, 3/8in. NPT Ports, Model# TVT03
Brand: Northman Fluid Power
This Northman in-line adjustable flow control needle valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. | *$36.99 |
 | 1 1/16 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-130
1-1/16" Bore Stud Mount Double Acting | *$19.77 |
 | De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D.=.50, Port=#4 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-012-021DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig. | *$260.02 |
 | 1 1/2 Bore x 2. Stroke, Double Acting - Low Profile, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-235
Low Profile - Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10°F to 165°F. Other sizes are available as special order. Please call for price and delivery. | *$104.61 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=5,000 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-5000 | *$248.68 |
 | Apache Female Thread (37 JIC Swivel) Coupling - 1/2in., 2 Wire
Brand: Apache Hose
This Apache reusable fitting is designed for female SAE 37 applications. Couples into hose like male pipe NPTF fittings. Female thread on both ends. Fitting Size (in.): 1/2, Wire: 2 | *$9.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-25-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 7.19 | *$185.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 2 1/2-16 thds., Stroke=1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-212-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$240.82 |
 | 1/4 NPT Ports, 120 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-433
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$153.69 |
 | Udor Omega 170/CC Pump
Brand: justudorpumps.com Model: jup_Omega-170_CC Part Number: jup_Omega-170_CC
The Udor Omega 170/CC Pump is a 4-diapraghm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. This 170/CC pump has a dual 1 3/8", 6-spline male PTO shaft. These Udor Omega pumps can be used for a range of horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$2,064.67 |
 | NorthStar Steel Hydraulic Oil Tank, 4.8 gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4011 fits oil tank Item# 4050 (strainer not included). Capacity (gal.): 4.8, Suction Port (in.): 11/2, Return Port (in.): 3/4, Mount Type: 4 bolt, Material Type: Steel, Dimensions L x W x H (in.): 15 x 9 x 8 | *$79.99 |
 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-48, 1 5/16-16 (1 Each)
Brand: Enerpac Part Number: FN-331 | *$30.50 |
 | 1/8 NPT, 120 V AC, 4-Way Stacking, ARO Selenoid Valves, w/Speed Control (1 Each)
Brand: Reid Supply Company Part Number: ARO-470
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$66.59 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475 | *$311.44 |
 | 3/4 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 12.00 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-260
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$62.39 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-12-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
 | 1/4 NPT Ports, 1. Inlet, 4 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-01
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$31.98 |
 | Udor Kappa 7/115 Volt Pump
Brand: justudorpumps.com Model: jup_Kappa-7_115 Part Number: jup_Kappa-7_115
The Udor Kappa 7/115 Volt Pump is a 2-diaphragm pump with pulsation dampener equipped to a 115 Volt TEFC motor. Motor comes with stub cord and an on/off switch. Use these Udor Kappa 7/115 Volt pumps for pest control, horticultural spraying, lawn care and injection spraying applications. Udor Kappa Pumps are manifolded with anodized aluminum construction internally. Kappa 7, 15, and 18 series pumps have glass-filled nylon heads. Note: It's recommended to use the UD1/4-300 control valve with this pump. | *$914.37 |
 | Apache Hydraulic Hose - 100ft.L x 3/8in. Dia.
Brand: Apache Hose
Boxed hydraulic hose. Cut it to lengths needed and attach reusable couplings (couplings sold separately). SAE 100R1, type AT. 2250 PSI. Hose Diameter (in.): 3/8, Hose Length (ft.): 100, Working Pressure (PSI): 2,250, Bursting Pressure (PSI): 9,000 | *$109.99 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9131ST (1 Each)
Brand: Enerpac Part Number: CST9131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$110.00 |
 | 5/8 Bore x 1 1/2 Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-110
5/8" Bore Universal Mount Double Acting | *$19.71 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 24in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/8 | *$229.99 |
 | Apache Reusable Hose Coupling - 2 Wire, Male Pipe, 3/4in.
Brand: Apache Hose
This Apache reusable hose coupling is male pipe NPTF. Fitting Size (in.): 3/4, Wire: 2 | *$11.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-04-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20 | *$175.99 |
 | 1/4 NPT, 1/4 Tube SizeParker Right Angle Flow Controls w/Presto Lock Fittings (1 Each)
Brand: Reid Supply Company Part Number: MFP-327
Right Angle Flow Controls with Presto Lock Fittings | *$26.60 |
 | Mounting Brackets for 1. inlet Size (1 Each)
Brand: Reid Supply Company Part Number: NM-106
Mounting Bracket | *$7.68 |
 | Udor Kappa 25/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-25_GR Part Number: jup_Kappa-25_GR
The Udor Kappa 25/GR pump is a 2-diaphragm pump with pulsation dampener and control unit with a pressure regulator that is adjustable. These Udor Kappa 25/GR pumps are most commonly used for horticultural and agricultural spraying applications, as well as a range of lawn and turf care applications such as pest control. This 25/GR pump by Udor features a manual dump lever, dual ball valve outlets, a pressure gauge and is equipped with a gearbox for 3HP to 5.5HP gas engines with 3/4" shafts. | *$763.18 |
| Prince Tie-Rod Cylinder - 3000 PSI, 2in. Bore, 12in. Stroke, 1 1/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 1/8 | *$139.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475-R | *$311.44 |
 | 2. Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-290
2" Bore Stud Mount Double Acting | *$54.33 |
 | Standard Half Coupling - 7/16in. Size
Brand: Northern Tool Equipment
Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): LO95 HUB 7/16, Fits Models: LO90, LO95, Max. HP: 11.16, Max. Torque (in.-lbs.): 194, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/32 x 3/64 | *$13.99 |
 | Westward 1MZJ8 Hydraulic Shop Press, 12 Tons
Brand: WestWard Tools
Hydraulic Shop Press, Frame Capacity 12 Tons, Ram Travel 6 In, Hose Size 1/4 In Inner Diameter x 6 Inches, Base Length 28 In, Base Width 28 In, Pump Type Hand Pump, Working Width 7 In, Overall Height 59 In, 2 1/2 to 34 1/4 In Range of Working Space Allows a Variety of Uses, Includes Hydraulic Hand Pump, Cylinder, and Hose | *$921.03 |
 | Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 8in. Stroke, 1 3/8in. Shaft, Model# PMC-5408
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All-steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 3/8 | *$149.99 |
 | Enerpac HC-9210 10' High Pressure Hydraulic Hose
Brand: Enerpac Part Number: 277-HC-9210
High pressure hydraulic hoses | *$105.95 |
 | Apache Forged Brass Hydraulic Valve - 600 PSI, 1/2in.
Brand: Apache Hose
This Apache bolt type hydraulic valve has 600 PSI working pressure. Chrome-plated ball and blow-out proof stem. Reinforced glass fiber-filled PTFE seats provide bubble tight resilient sealing and NPTF screwed ends. Allows uniform flow in either direction with a quick quarter turn. Port Size (in.): 1/2, Max. PSI: 600 | *$8.99 |
 | Repair Kit for Udor Zeta 40/85
Brand: justudorpumps.com Model: jup_8700_60 Part Number: jup_8700_60
This Diaphragm Repair Kit will fix and restore your Udor Zeta 40 and 85 pumps. The kit comes with 3 Desmopan diaphragms and 6 valve assembly o-rings. | *$105.27 |
 | 3/4 Bore x 6. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-61
Front Block Mount - Double Acting | *$48.69 |
| Diaphragm Repair Kit for Kappa 33/43/53
Brand: justudorpumps.com Model: jup_8700_45 Part Number: jup_8700_45
The Diaphragm Repair Kit for Udor Kappa 33, 43 and 53 pumps fixes and repairs the diaphragms on your existing Udor Kappa 33, 43 or 53 pump. The kit comes with 3 desmopan diaphragms and 6 valve assembly o-rings. | *$96.02 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18251ST (1 Each)
Brand: Enerpac Part Number: CST18251
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$140.00 |
 | 5/8 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-75
5/8" Bore Stud Mount Double Acting | *$16.67 |
| Standard Half Coupling - 7/8in. Size
Brand: Northern Tool Equipment
Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): LO95 HUB 7/8, Fits Models: LO90, LO95, Max. HP: 11.16, Max. Torque (in.-lbs.): 194, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$13.99 |
|
