| | Current Tools 291 Optional High-pressure hose 3/8" x 6' with 2 each 3/8" male couplers
Brand: Current Tools Part Number: 291
291 Optional High-pressure hose 3/8" x 6' with 2 each 3/8" male couplers. Heavy duty design for long life. Convenient pendant control for remote operation. 2 speeds for fast ram advance. For use with hydraulic benders. | *$128.95 |
 | ANCHOR BRAND B24000 BRASS REPLACEMENT GAUGE 2" (PACK OF10)
Brand: Anchor Model: B24000 Part Number: B24000
"ANCHOR BRAND" BRASS REPLACEMENT GAUGE
Type: Replacement Gauge
Diam: 2 in
Thread Size: 1/4 in (NPT)
Pressure: 400.00 psi
Case Material: Brass
One-piece threaded polycarbonate lens
Cupped aluminum dial with white background and red and/or black markings. | *$81.99 |
 | Prince Adjustable Relief Valve - 1/2in., Model# RD-1850-H
Brand: Prince
This compact relief valve is adjustable to 2500 PSI. | *$49.99 |
 | ALEMITE 1627-B GREASE FITTING - 1/4" PTF
Brand: Alemite Model: 1627-B Part Number: 1627-B
"ALEMITE" GREASE FITTING
7/8" length.
27/64" shank length.
9/16" hex size.
Dirt-excluding ball check.
Maximum pressure: 8,000 psi.
Dry seal eliminates need for sealant.
Exceeds 48-hour salt-spray test.
Widely used for larger bearings on heavy machinery.
Recommended for use with heavy lubrications for cold weather applications. | *$1.99 |
 | Prince Heavy Duty Hydraulic Motor - 12 GPM, 2200 PSI, Model# ADM50-4RP
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$269.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 2in. Bore, 6in. Stroke, Model# 30TL06-112
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring piston and barrel seals with anti-extrusion rings, polyurethane U-cup rod seal and heavy-duty rod wiper provide positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 6, Closed Pin Center (in.): 16 1/4, Shaft Diameter (in.): 1 1/8 | *$79.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 19.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 12 Volt DC Solenoids, Model# SWH-G03-C6-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. GPM: 19.8, Max. PSI: 4,500, Directional Control: 4 way, 3 position, Volts: 12, Indicator Light: Yes | *$139.99 |
 | Prince 3 Spool Control Valve, Model# HC-V-R21
Brand: Prince
Three spool control valve with float on one spool. Load checks each spool, to 25 GPM. Relief valve preset at 2000 PSI; adjusts from 1500-3000 PSI. Power beyond capacity. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$319.99 |
 | Hydraulic Pump Mounting Bracket
Brand: Northern Tool Equipment
With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cast aluminum. Fit our pumps 1012, 1053 and 1056. U.S.A. Bracket Length (in.): 5, Bolt Circle (in.): 3 5/8, Mounting Type: 4 bolt | *$29.99 |
 | 4 Ton Porto Power Kit (BHKB65114) Category: Porta Powers and Pumps
Brand: BlackHawk Part Number: B65114
Item #: BHKB65114. pbFeatures Benefits:/bulliSnap lock design for quick and easy assembly/liliAutomatic pump overload system protects against damage to rams and equipment/liliComes in a blow molded case/liliHeavy walled extension tubes stand up in tough situations/liliTotal weight: 46 pounds/li/ulThis 4 ton Porto-Power kit delivers the pushing and spreading power needed to make easy work of everyday repairs. brCustomers also search for: Discount 4 Ton Porto Power Kit, Buy 4 Ton Porto Power Kit, Wholesale 4 Ton Porto Power Kit, 047077042113, ToolWeb, Porta Powers and Pumps | *$191.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Float Center Spool, 12 Volt DC Solenoids, Model# SWH-G02-C4-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with A, B and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT ports. | *$109.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Closed Center Spool, 12 Volt DC Solenoids, Model# SWH-G03-C2-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | Haldex Auto Hoist Power Unit 3.5 HP 115/230V, Model# 1280624
Brand: Haldex | *$519.99 |
| Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 4in. Bore, 18in. Stroke, Model# 40TL18-150
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 1/2 | *$179.99 |
 | Haldex High Performance Gear Pump 1.159 Cu. In., Model# WP09A1B190L03BA103N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. | *$189.99 |
 | Pull Back Ram for 10 Ton Porta Power - Heavy Duty
Brand: Raffael Tools Part Number: pp10-pbr-hd
li Stroke: 6" li Material: Steel li Capacity: 10 Ton br Weight: 19.95 Lbs | *$172.09 |
 | H2DP , FHK Series Hydraulic, Brass Socket, Socket Dust Plug for 1/4 in. size
Brand: Foster Manufacturing | *$5.20 |
 | Haldex 12 Volt DC Power Unit, Solenoid Operation, Single-Acting, Model# 1261014
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. Items 1076 and 1077 are for double acting cylinders; others are for single acting cylinders. U.S.A. | *$339.99 |
 | Enerpac RC-102 10 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-102 Part Number: RC-102
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 4.78"brCylinder Capacity: 10 TonsbrCylinder Effective Area: 2.23 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 4.75 Cubic InchesbrStroke: 2.13"brWeight: 5.1 lbsbr | *$249.00 |
 | Hydraulic Pump Mounting Bracket
Brand: Northern Tool Equipment
With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cast aluminum. Fit our pumps 1012, 1053 and 1056. U.S.A. Bracket Length (in.): 5 5/8, Bolt Circle (in.): 6 1/2, Mounting Type: 4 bolt | *$54.99 |
 | K2B , FHK Series Hydraulic, Brass Plug, 1/4 in. Female Pipe
Brand: Foster Manufacturing | *$4.96 |
 | H2B , FHK Series Hydraulic, Brass Socket, 1/4 in. Female Pipe
Brand: Foster Manufacturing | *$10.08 |
 | 20 Ton Air Bottle Jack
Brand: Neiko
JACK AIR BOTTLE 20 TON -S- | *$79.99 |
 | Buyers Breather Cap
Brand: Buyers | *$5.99 |
 | Haldex High Pressure Hydraulic Gear Pump, Model# 1002967
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. | *$129.99 |
 | Heavy-Duty Half Coupling - 7/8in. Size
Brand: Northern Tool Equipment
Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft diameter. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. Shaft Diameter (in.): LO99 HUB 7/8, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$19.99 |
 | Prince Energy Motor Spool Open Center Control Valve - 20 GPM, Model# RD-2575-M4-EDA1
Brand: Prince
Comes with motoring spool that will free wheel in neutral. Valve will detent in both directions. Relief valve preset at 1500 PSI; adjustable to 3000 PSI. 3/4in. inlet and outlet, 1/2in. working ports. Includes motoring spool. 20 GPM flow rate. 3-year limited warranty. U.S.A. | *$109.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 25 GPM, 3000 PSI, 3/8in. NPT Ports, Model# HDT032B2
Brand: Northman Fluid Power
This Northman industrial 4-way valve is commonly used to extend and retract a double-acting hydraulic cylinder. It is actuated manually with the hand-lever. As a spring-offset valve, it will remain in its home position until shifted and held, returning to home when the lever is released. | *$104.99 |
 | Haldex High Pressure Hydraulic Gear Pump .097 Cu. In., Model# 1002963
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. | *$119.99 |
 | AM15-04 , ISO A Series, Hydraulic, 2-Way Shut-Off, Plug, 1/4 in. Female Pipe Thread
Brand: Foster Manufacturing | *$7.20 |
| AF15-04 , ISO A Series, Hydraulic, 2-Way Shut-Off, Socket, 1/4 in. Female Pipe Thread
Brand: Foster Manufacturing | *$16.00 |
 | Buyers Dust Cap For Female Coupler - 1/2in., Model# FF08FC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$6.99 |
| Haldex High Pressure Hydraulic Gear Pump .517 Cu. In., Model# 1002968
Brand: Haldex
Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy-duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. | *$139.99 |
 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$479.99 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve with Reverse Free Flow - 20 GPM, 3000 PSI, 3/4in. NPT Ports, Model# TCVT06
Brand: Northman Fluid Power
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. | *$79.99 |
 | Porto-Power Turbo Air/Hydraulic Pump - 90-175 PSI
Brand: Porto-Power
Hydraulic pump delivers 10,000 PSI hydraulic pressure with only 80 PSI air pressure. Features air exhaust muffler for quieter operation and air and oil inlet filters for reduced risk of contamination. Great oil capacity to handle bigger jobs. | *$329.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 24in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/4 | *$289.99 |
 | Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 2in. Bore, 8in. Stroke, 1 1/16in. Shaft, Model# 20WX08-112
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 8, Shaft Diameter (in.): 1 1/16 | *$149.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 16in. Stroke, 1 1/2in. Shaft, Model# PMC-8316
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 1/2 | *$189.99 |
 | 5 each: Ace Garden Hose Swivel Coupler (GT3080A)
Brand: Ace Trading - Shin Tai Model: GT3080A Part Number: GT3080A
Sold as 5 each. Yellow brass. Low pressure garden hose applications. 3/4" Female hose x 3/4" Female hose. Carded . Manufacturer number: GT3080A. SKU #: 71937. Country of origin: Taiwan. Distributed by Ace Trading - Shin Tai. | *$16.99 |
 | Buyers Fluid Level Gauge With Thermometer
Brand: Buyers
Fluid level gauge mounts on side wall of reservoirs up to in. wall thickness. Metal cover protects gauge from damage. Includes thermometer. Mounts with hollow in.-13 bolts on 5in. centers. 6.5in.H x 1.5in.W x 2.2in.D. | *$16.99 |
 | Standard Half Coupling - 3/4in. Size
Brand: Northern Tool Equipment
Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): LO95 HUB 3/4, Outside Diameter (in.): 2 1/8, Fits Models: LO90, LO95, Max. HP: 11.16, Max. Torque (in.-lbs.): 194, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 3/16 x 3/32 | *$13.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 16in. Stroke, 1 3/8in. Shaft, Model# PMC-5416
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 3/8 | *$179.99 |
 | Lion Double-Acting Tie-Rod Cylinder - 2500 PSI, 2 1/2in. Bore, 24in. Stroke, Model# 25TL24-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/8 | *$129.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 30in. Stroke, Model# 25WC30-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$219.99 |
 | Prince One Spool Control Valve, Model# HC-V-R22
Brand: Prince
4-way with floats; has balanced spools with select fit. Load checks to prevent load drops when shifting directions. Good for use on snowplows, dozers, loaders etc. Float valves allow blade or bracket to float along ground. Will accept power beyond plug conversion. Preset at 2000 PSI. Adjustable from 1500 to 3000 PSI. USA | *$159.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3 1/2in. Bore, 24in. Stroke, 1 1/2in. Shaft, Model# PMC-5524
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 32, Shaft Diameter (in.): 1 1/2 | *$229.97 |
 | Buyers 1/2in. F/F NPSM x 1/2in. M NPTF Swivel Branch Tee
Brand: Buyers
For high pressure hydraulic systems. Swivel adapters are rated up to 10,000 PSI, depending on size. NPSM x NPTF Thread for metal to metal seal. U.S.A. | *$5.99 |
 | Buyers 1 1/4in. Hydraulic Pillow Block
Brand: Buyers
Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. | *$9.99 |
 | Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder - 4in. Bore, 12in. Stroke, Model# 639201
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. 2 1/2-year limited warranty. | *$139.99 |
|
