 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 3000 PSI, 5in. Bore, 14in. Stroke, Model# 50TH14-200
Brand: Lion 3000
Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 14, Closed Pin Center (in.): 26 1/4, Shaft Diameter (in.): 2 | *$319.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 10.7 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 120 Volt AC Solenoids, Model# SWH-G02-C6-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. | *$119.99 |
 | ENERPAC HC-7206 PRESSURE HYDRAULIC HOSES 6'
Brand: Enerpac Model: HC-7206 Part Number: HC-7206
"ENERPAC" HYDRAULIC HOSES
Operating Pressure: 10000.0 psi [Max]
Connections: 3/8 in NPTF x CH-604
Length: 6 ft
Inside Diam: 1/4 in
Material: Thermo-plastic
Wt.: 2.30 lb
4:1 design factor
Two layers of steel wire braids
Outside jacket is polyurethane, to provide maximum abrasion resistance
Exhibits low volumetric expansion under pressure to enhance overall system efficiency | *$182.99 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C=2.998, O=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 090-011-113 | *$235.95 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-20-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. | *$185.99 |
 | SunPump SCB 20-150 Booster water Pump
Brand: SunPump
SCB Series MultiStage Booster PumpsSunPumps SCB series pressure pumps are multistage centrifugal designed primarily for boosting pressure from surface water as long as the water supply is above or no more than 3 ft below the level of the pump. They are ideal pumps for Booster Pump Systems, Sprinkler Systems or In-line Pressure Pumps. | *$1,333.49 |
 | Hydraulic Knockout Set 1/2"-2" w/Foot Pump (623-KOF520) Category: Hydraulic Knockout Punches
Brand: Gardner Bender Part Number: 623-KOF520
Item #: 623-KOF520. Four point design allows slug to drop automatically without splittingbrCompetitors punches and dies are interchangeable pulliCutting Diameter = 1/2 in [Min], 2 in [Max]liCutting Thickness = 12 gauge (stainless steel) [Max], 10 gauge (mild steel) [Max]liThroat Includes = PF65 Foot Pump, (6) Punches 1/2 - 2 in, (6) Dies 1/2 - 2 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal CaseliWt. = 40 lb/ul brCustomers also search for: Discount Hydraulic Knockout Set 1/2"-2" w/Foot Pump, Buy Hydraulic Knockout Set 1/2"-2" w/Foot Pump, Wholesale Hydraulic Knockout Set 1/2"-2" w/Foot Pump, 032076813598, KOF520, Hydraulic Knockout Punches | *$1,474.21 |
 | SunPump 85836 PCB-120BT-M1 Pump Controller
Brand: SunPump
SunPumps Brush-Type Motor ControllersPCB 120BT-M1 (1 HP Brush Type)SunPumps PCA and PCB series Pump Controllers are high quality, micro-processor controlled DC power converters designed as the interface between a DC powered pump and the power source. The DC source may be solar modules batteries or systems using wind generators. The main purpose of a PC series controller is to maximize the total daily water delivery while providing protection for the pump as well as the power source.The primary function of the PC series controller is to boost the current of solar modules in low sunlight conditions while holding the voltage of the solar modules\at the maximum power point. This allows a pump to start earlier in the morning and stay running in the evening.SunPumps PC series controllers have many unique features designed specifically for water pumping. All PC series controllers include a pump speed control circuit, a remote switch circuit, a sensor-less low water cut-off circuit, an electronic circuit breaker and indicator lights. The PCS series controllers have specific models for Brushless DC as well as Brush-type DC motors. | *$662.70 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount One NFPA D05 Valve 1 NFPA D05 Modular Valve, Model# MBK031
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and one modular valve. Designed for the NFPA D05 size valve series. | *$21.99 |
 | SunPump SCS 10-230 Submersible Pump
Brand: SunPump
SCS- 10-230 1 HP Submersible Pump1 HP brush less DC submersible pump. The pump can be operated at four different nominal voltages. | *$2,397.03 |
 | IMPERIAL 97470 DOUBLE SHUT-OFF HYDRAULIC COUPLER 1/8" - BRASS
Brand: Imperial Model: 97470 Part Number: 97470
"IMPERIAL" ISO B HYDRAULIC COUPLER
Body Size: 1/8
Female Thread: 1/8 NPTF
Tomco No.: TH1-11-002
Parker No.: BH1-60
Brass construction.
Aeroquip No.: FD45 1101-02-02
Double Shut-Off (ISO "B") Quick Coupler.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Rated at a working pressure of 1,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Used with Double Shut-Off (ISO "B") Quick Coupler Nipple, Part No. 97471
Positive alignment and even load distribution provided by the ball-locking mechanism.
Hose protection is the result of swivel action allowed by the coupler. | *$18.99 |
 | SunPump 85204 SDS-D-228 Submersible Pump
Brand: SunPump
SDS-D-228 Submersible PumpSunPumps SDS-D series submersible pumps are one of the most highest quality, low voltage DC pumps on the market. They were the first diaphragm submersible introduced to the solar industry in 1988 and have an excellent performance record. | *$832.41 |
 | Prince Tie-Rod Cylinder - 2500 PSI, 3in. Bore, 8in. Stroke, 1 1/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$149.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-06-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. | *$175.99 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-25 (1 Each)
Brand: Enerpac Part Number: CY2129-25
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$301.00 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount One NFPA D05 Valve 2 NFPA D05 Modular Valves, Model# MBK032
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and two modular valves. Designed for the NFPA D05 size valve series. | *$24.99 |
 | Grundfos 6 SQF-2 SQFlex Solar Water Pump
Brand: Grundfos
The SQFlex system is more than just a pump. SQFlex is a total concept tailored to any individual requirements. By examining some variables, Grundfos and the WaterMaker can put together the perfect combination for any purpose. All they need to know is the location, the water table depth and how much water is needed, and they will be able to find the most efficient energy source for the system. | *$1,974.36 |
 | Flow Meter With Thermometer
Brand: Northern Tool Equipment
Handles up to 32 GPM at 6000 PSI. Includes 180deg F thermometer. Otherwise, similar to #2048. | *$319.99 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A=3.959, B=.709, C=None (1 Each)
Brand: De-Sta-Co Part Number: 031-L-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$49.31 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Single Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-S-475 | *$311.44 |
 | Apache Hydraulic Hose - 3/4in. x 36in.L, 2-Wire, 3000 PSI
Brand: Apache Hose
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hose Diameter (in.): 3/4, Hose Fitting Size (in. NPT): 3/4, Hose Length (in.): 36, Working Pressure (PSI): 3,000 | *$18.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1/2-20 thds., Stroke=.219 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-400
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$84.70 |
 | Northman Fluid Power In-Line Hydraulic Needle Valve - 20 GPM, 3000 PSI, 3/4in. NPT Ports, Model# TVT06
Brand: Northman Fluid Power
This Northman in-line adjustable needle valve is designed to restrict the flow of oil in a hydraulic system in order to control the speed of a cylinder or motor. | *$64.99 |
 | Apache Hydraulic Hose - 3/4in. x 48in.L, 2-Wire, 3000 PSI
Brand: Apache Hose
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hose Diameter (in.): 3/4, Hose Fitting Size (in. NPT): 3/4, Hose Length (in.): 48, Working Pressure (PSI): 3,000 | *$21.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 14in. Stroke, Model# 25WC14-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$159.99 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 3/4-16 thds., Stroke=.313 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-501
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$92.40 |
 | SunPump SCB 8-40P-24 Booster Pump
Brand: SunPump
SunPumps SCB series pressure pumps are multi-stage centrifugals designed primarily for boosting pressure from surface water as long as the water supply is at or above the level of the pump. They are ideal pumps for home pressure systems, sprinkler systems or in-line booster pumps. Like the SCS series, SunPumps SCB series pressure pumps are high-quality, maintenance-free, DC pumps specifically designed for water delivery in remote locations. They operate on 100 to 1500 watts of DC power with 24V through 180V models available. Models can be powered by batteries or directly from solar panels. 1-year warranty. | *$1,123.35 |
 | SunPump SCS 2-280 Submersible Pump
Brand: SunPump
SCS 2-280 1/2 HP Submersible PumpSunPumps SCS 2-280 is a 1/2 HP brushless DC submersible pump. The pump can be operated at two different nominal voltages. | *$2,409.97 |
 | SunPump 85180 SCS 4-550 Submersible Pump
Brand: SunPump
SCS 4-550 2 HP Submersible PumpSunPumps SCS 4-550 is a 2 HP brushless DC submersible pump. The pump can be operated at five different nominal voltages. | *$2,687.97 |
 | De-Sta-Co Hydraulic Power Workholding, Semi Automatic - Air/Hydraulic Booster, A=6.5, B=16.375 (1 Each)
Brand: De-Sta-Co Part Number: 039-104-000DE
Converts normal shop line air pressure to high pressure hydraulic power. With the system filled, the volume of oil required to actuate a cylinder or pressure point is only equal to the cubic content of the piston displacement. Boosters have built in manifold and are made of corrosion and wear-resistant materials. Hydraulic piston tube has wear rings and the air piston is self centering for long life. Boosters offer automatic relief of system overcharge as well as complete automatic bleeding with each return, eliminating prefilling. Large volume visible oil reservoir automatically replenishes the system with available reserves. 100 psig max. input air pressure. | *$1,034.09 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-12-S9-C
Brand: Dynamic
The Dynamic Fluid Components high-pressure hydraulic gear pump features all-aluminum construction and produces displacement of 0.73 cu. in./rev. | *$175.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 010-021-114 | *$160.60 |
 | SHURflo 902-100 Pump Controller for 9300 Pump
Brand: SHURflo
Linear Current Booster with float switch terminals | *$156.57 |
 | Hydraulic Hose Fitting, 1/4"
Brand: Gates Part Number: G252300404
Gates G25230-0404 MEGACRIMP COUPLI | *$4.71 |
 | SHURflo 5904-1211 Smart Sensor Pump 24 VDC
Brand: SHURflo
The SHURflo 5900 series 5-chamber pump delivers up to 5.7 GPM at 60 psi from a 12 Vdc or 24 Vdc battery bank. The variable speed feature provides smooth and quiet operation and consumes only the power needed at any flow. It is the perfect pump for cabin or small home systems. | *$280.96 |
 | Haldex AC Hydraulic Power System Self-Contained, 2 HP, 115/230V AC, Model# 1400028
Brand: Haldex
Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. Reservoir Capacity: 5 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 2, Volts: 115, 230 AC, Phase: 1 | *$999.99 |
 | Hydraulic Hose Fitting, 1/2"
Brand: Gates Part Number: G251700806
Gates G25170-0806 MEGACRIMP COUPLI | *$10.70 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=1,650 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-1650 | *$233.52 |
| | IMPERIAL 99465 FLAT FACE O-RING MALE CONNECTOR FITTING 3/4X3/4(PACK OF 2)
Brand: Imperial Model: 99465 Part Number: 99465
"IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Male Pipe Size: 3/4"
Material: 12L14 steel.
Sealing Method: O-Ring
Excellent vibration resistance.
Cross Reference: 4205 x 12
Tube Outside Diameter: 3/4"
Maximum operating pressure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$22.69 |
 | Haldex Cast Iron Hydraulic Gear Pump - 3.33 Cu. In., Model# 2102727
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A | *$269.99 |
 | SunPump SCS 3-425 Submersible Pump
Brand: SunPump
SCS- 3-425 1 HP Submersible PumpSunPumps SCS3-425 is a 1 HP brush less DC submersible pump. The pump can be operated at three different nominal voltages. | *$2,534.42 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 2 1/2-16 thds., Stroke=1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-212-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$240.82 |
 | SunPump SCB 20-25P-24 Booster Water Pump
Brand: SunPump
SCB Series MultiStag Booster PumpsSunPumps SCB series pressure pumps are multistage centrifugal designed primarily for boosting pressure from surface water as long as the water supply is above or no more than 3ft below the level of the pump. They are ideal pumps for Home Pressure Systems, Sprinkler Systems or In-line Booster Pumps. | *$1,147.60 |
| Grundfos 40 SQF-3 SQFlex Solar Water Pump
Brand: Grundfos
The SQFlex system is more than just a pump. SQFlex is a total concept tailored to any individual requirements. By examining some variables, Grundfos and the WaterMaker can put together the perfect combination for any purpose. All they need to know is the location, the water table depth and how much water is needed, and they will be able to find the most efficient energy source for the system | *$1,974.36 |
| SunPump 85200 SDS-D-128 Submersible Pump
Brand: SunPump
SDS-D-128 Submersible PumpSunPumps SDS-D series submersible pumps are one of the most highest quality, low votage DC pumps on the market. They were the first diaphragm submersible introduced to the solar industry in 1988 and have an excellent performance record. | *$832.41 |
 | Replacement Ram for 10 Ton Capacity Porta Power Set (MTN5412) Category: Hydraulic Tool Parts and Accessories
Brand: Mountain Part Number: 5412
Item #: MTN5412. brCustomers also search for: Tools and Storage\Material Handling\Lifts and Hydraulics\Hydraulic Tool Parts and Accessories Discount Replacement Ram for 10 Ton Capacity Porta Power Set, Buy Replacement Ram for 10 Ton Capacity Porta Power Set, Wholesale Replacement Ram for 10 Ton Capacity Porta Power Set, 40613364025725, ToolWeb, Porta Powers and Pumps | *$22.79 |
 | SHURflo 4111-035 Power Twin Pump with dual manifolds 12VDC
Brand: SHURflo
The shurflo power twin pump is one of the most efficient 12 Vdc high-flow, self-priming pumps and features a dual manifold system with 5/8 hose barb ports and a thermally protected motor with heat sink for extended operation. It is capable of delivering up to 6.25 GPM. | *$300.25 |
| | STANDARD CMP-350 SUBMERSIBLE
Brand: Vertex Standard Part Number: CMP-350 | *$57.48 |
 | Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 1/2 | *$159.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-08-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. | *$175.99 |
|
