 | Great Neck 55PM 12-Ounce Plastic Mallet Brand: Great Neck Model: 55PM Part Number: 55PM Wood handle. Plastic and rubber heads. Plastic head won't absorb grease, water, oil, or dirt. Head is cross pinned in select hickory handle. No. 35PM: 8 oz., 9" handle, 1" x 3 1 2" head No. 55PM: 12 oz., 10 3 4" handle, 1 1 4" x 3 5 8" head | *$9.99 |
 | Center Punch Nailset Brand: SPRING TOOLS Model: 32R02-1 Part Number: 32R02-1 * Center punch and 2/32" nail setter * Center punch creates a deeper indentation for drill and nail starts * Nail setter drives finish nails below the surface of the wood, use for #5 and #6 finish nails * Hardened steel * Spring Line Tools with lifetime spring * No hammer needed * Ridged ends for sure grip * Carded | *$6.99 |
 | OLFA Graphic Cutter (SAC-1) Brand: Olfa Model: 9150 Part Number: SAC-1 The ultra slim design of this stainless steel graphics cutter makes it a popular choice with professional graphic artists and sign makers. Features a slide lock and pocket clip/blade snapper. | *$7.89 |
| | Leatherman 8613140 Expanse e55 Straight Blade Knife Brand: Leatherman Model: 8613140 | *$49.85 |
 | Stabila 25010 10-Inch Die-Cast without Magnets in Reading Surface Brand: Stabila Model: 25010 Part Number: 81S / 25010 The world's most highly accurate and rugged torpedo levels. A favorite with tile installers. Can be used as a screed, and/or trowel tapped for leveling with absolute impunity. Totally waterproof, simple bucket and brush clean up. Vial accuracy in both vertical and horizontal applications. .029 degrees guaranteed for life. Length: 10 in. | *$24.99 |
 | Gerber 07400 DET Multi-Plier 600 with Blasting Cap Crimper Brand: Gerber Model: 07400 Part Number: 22-07400 Gerber Multi-Plier 600 -Det Black Sheath 1-HAND Opening Multi-Tool Boxed - Gerber 07400. | *$83.99 |
 | Klein Tool 604-3 No.0 Phillips-Tip Miniature Screwdriver with 3-Inch Round Shank Brand: Klein Model: 604-3 Part Number: 604-3 #0 Philips Tip Miniature Screwdriver, 3" Round Shank, Precision Formed Tip Provides An Exact Fit For Small Screw Applications. | *$5.27 |
 | Grizzly H3103 Curve Gouge Slipstone - 1,000 Grit Brand: Grizzly Part Number: MH-2 Sharpen gouges from 1/2" wide to 2" wide with these tapered Japanese aluminum oxide water Slipstones. Water stones aggressively sharpen and polish at the same time for amazing results. Choose 240 grit, 1000 grit and 4000 grit. | *$15.95 |
 | Powerbuilt 648469 1/2-Inch Driver by 30mm Axle Nut Socket Brand: Powerbuilt Model: 648469 | *$11.99 |
 | CRAFTERS HOT KNIFE, Foam Cutter w/ 6" Blade, Gets up to 700 degrees F Brand: TL MARSHALL CO Model: TLM-1000 Part Number: TLM-1000 New Heavy Duty Hot Knife Carves a Niche in Hobbies Crafts
Burbank, Calif. Finally, professionals and hobby model makers get the right tool at the right price with the Crafter's Hot Knife.
This tool is popular for cutting wax and with model railroaders and wargamers for carving of foam terrain. The hot knife also caught on with theater crews building props and sets. The Crafter's Hot Knife is a step up from traditional wire cutters, offering maneauverability and rigidity as two clear advantages. "The Crafter's Hot Knife brings a new dimension to the modeler's table for carving many types of foam. The knife makes plunge cuts into blocks and shapes possible. Bow cutters cannot make the plunge cuts. The maneuverability of the knife is superior to anything else that I have found on the market," says Miles Hale, Master Model Railroader, Vice President Association of Professional Model Makers. The most distinguishing difference of The Crafters Hot Knife is the rigid and solid, 6" Stainless Steel blade. It slices quickly and cleanly through high-density foam without bending, warping or breaking like common wire cutters.
Other features include 110 volt, 130 watts and a 6' electric cord. Temperature is controlled by the user with a "dead man's switch" that delivers the power up to 700 degrees fahrenheit temperatures. This light/medium duty tool will shut down to cool instead of burning out after 5-10 minutes of continual use.
"We knew we had something good when we hit the market with the Crafter's Hot Knife", says TL Marshall Company president, Lorraine Marshall. "The market offered crafters and hobbyists only hot wires to carve foam. With the popularity of foam terrain, props, crafts and the booming cottage candlemaking industry.
Features Benefits of the Pro-1 Hot Knife
* Rigid Stainless Steel Blade will not bend, warp or break * Economical Durable * Up to 750 degrees F
* Heats up in 1 minute * 110 AV, 130 watts * 6' Electric Cord | *$67.00 |
 | Titan 18453 5-Piece Locking Plier Set Brand: Titan Model: 18453 Part Number: 18453 Chrome vanadium steel pliers have adjustable locking action. Comfortable TPR handles for maximum grip and comfort. Includes 5in., 7in. and 10in. standard jaw, plus 8in. and 6in. long nose pliers. | *$25.49 |
 | Wilton 6-Piece 3/8-Inch Drive Star Bit Socket Set - 36054 Brand: Wilton Model: 36054 Part Number: 36054 6-Piece Star Bit Socket Set - 3/8" Drive (36054) - Professional quality in design and construction. Secured with a press fit into polished chrome sockets. Set includees: 3/8 Drive; Star Bit Socket: T10, T15, T20, T25, T27, T30 | *$19.95 |
 | Wiha 66991 MagicRing Ball End Hex Key Set, Long Inch, In Holder, 13 Piece Brand: Wiha Model: 66991 Part Number: 66991 Wiha 66991 thirteen piece MagicRing screw holding long inch ball end hex L-key set in ProStar holder. Includes inch sizes .050, 1/16, 5/64, 3/32, 7/64 standard ball ends, no ring and 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 with ring. Uses spring steel retaining rings to hold screws, hard chromed. | *$31.36 |
 | 12" STAINLESS STEEL CENTER FINDER RULER Brand: Peachtree Woodworking Find the center point quickly and accurately with this handy steel center finding ruler. You simply align the center finding ruler so that the same measurement appears on both sides of the zero mark | *$7.99 |
 | Greenlee 77HP Tone Generator Brand: Greenlee Model: 77HP Part Number: 77HP By applying a tone signal to a wire pair or single conductor, and using an inductive amplifier probe, the tone generator permits technicians to identify that conductor within a bundle, at a cross-connect point or at the remote end. These generators can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coax cables, de-energized AC wiring, etc. All 77 Series Tone Generators provide the four basic functions of tone signal, continuity testing, talk battery supply and line polarity confirmation. | *$31.75 |
 | DigiPas Mini Digital Level/ Digital Protractor/ Angle Finder with Magnetic Base (20cm long/0.1 Degree Resolution) Brand: DigiPas Model: DWL 200 This digital level has a display for any angle around 360 degrees allowing for precise speedy and reliable measurements. The measurement can be displayed in degrees or % of slope. It offers an accuracy of +/- 0.1 at 0 and 90 degrees and +/- 0.02 at other angles. | *$55.00 |
 | Zircon 63266 StudSensor Edge Brand: Zircon Model: 63266 | *$10.08 |
 | Offset Hand Seamer, 3" Brand: Malco Model: S3 Part Number: S3 Precise v-notched depth graduations on jaws are in 1/4" increments. Jaws are drop forged, high impact steel. Hardened steel handles resist abuse. Powerful compound leverage design. Black vinyl cushion grips with handle stops offer added comfort and easeof operation. All steel parts and hardware are nickel plated. Jaw capacity 1/4" to 1-1/4" depth x 3-1/4" width. | *$35.16 |
 | Telescopic Inspection Mirror Brand: Michigan Industrial Tools Part Number: 7604 Chrome plated brass construction. 1-1/4 Inch inspection mirror with 360 degree ball swivel joints holds any angle position. Telescopes from 6 to 19 inches. Compact pen size with pocket clip. | *$2.48 |
 | Genius 7pc 3/8" Drive Triple Square Bit Socket Set Brand: Genius Model: BS-307M Part Number: BS-307M 3/8 Triple square bit sockets | *$17.00 |
 | Compact Emergency Magnesium Fire Starter Brand: Senter | *$0.99 |
 | SE 4.5" Round Nose Mini Plier, Double Leaf Spring Brand: Unknown New Round Nose Pliers For Wire Wrapping, Beading, Jewelry Watch Repair. This is a new pair of high carbon steel round nose pliers Great for wire wrapping, beading, jewelry repair and removing links from watch bands. Perfect for jewelers, beaders and crafters. Has foam grips and double leaf springs for ease of use. They measure approximately 4.5" long. Due to manufacturer updates, photos may vary from the actual item or items received. Newer versions may be shipped before the photo shown is updated. | *$1.95 |
 | Fairgate 23 Center-Finding Ruler, English Brand: Stamp Inc Part Number: 23-CM51470 Our satin finished aluminum centering rules allow you to accurately locate the exact center between any two points in just seconds. Simply align rule until the measurement to the right is equal to that of the measurement to the left of zero and mark your center point. More reliable and easier than a tape measure or dividers. Rules are graduated in 1/32" increments on top and 1/16" on the bottom. | *$5.08 |
 | Neiko Tools USA Wire Twister Brand: Neiko Tools Model: 61025A Part Number: 61025A Neiko Tools USA Wire Twister * Heavy Duty Construction with Black Soft Grip Handle * Self Spring Return Action * Insert Hook Over Loop End on Wire, Pull Twister then Tool will Automatically Twist the Wire * Can be held with two hands if needed * Total len | *$7.90 |
 | Leatherman 830589 Vista 830589 Hunting Pruner With Camo Nylon Sheath Brand: Leatherman Model: 830589 Part Number: 830589 100% Stainless Steel Bypass Pruners Awl Choke Tube Tool Flat Screwdriver Saw Straight Serrated Edge Combo Knife Phillips Screwdriver Soft Wire Cutters Bottle Opener Nylon Sheath Non-Slip Handles. | *Too low to display |
 | Columbia River Knife and Tools 2011 Stubby Pocket Razel Chisel Razor Edge Blade Brand: Columbia River Model: 2011 Part Number: 2011 Columbia River Knife Tool 2011 Stubby Pocket Razel, Chisel, Micarta Handle, SheathColumbia River Knife Tool 2011 Stubby Pocket Razel, Chisel, Micarta Handle, Sheath Features:; Packaging: N/A; Made In: China | *$50.89 |
 | Robert Larson 849-3099 4-Piece Gimlets Set Brand: Robert Larson Model: 849-3099 Part Number: 849-3099 No need to find an electrical outlet with a gimlet. These high quality tools are hardened to the end of the flute, and the screw thread is specially annealed to make sure that it is not easily broken. The double spiral flutes are machined, rather than twi | *$9.00 |
 | General Tools 809 Chisel/Plane Blade Sharpener Brand: General Tools Model: 809G Part Number: 809 The adjusting knob determines the bend in the guides body and the angle of sharpening at the tools front edge. Angles can be set with the printed scale, a protractor or by eye. Spring tensioned clamp holds tools up to 2-5/8" wide. Two-wheeled rear roller moves in a straight line during use and will not wander sideways like other guides. Lightweight sharpener is made of high-impact Lexan. | *$18.29 |
 | TRUCK TOOL BOX CONTICO 3725 STORAGE ATV GARAGE Brand: Contico Model: 3725 Part Number: 3725 Pro Tuff Bin, Lockable, Storage 9 Cubic Feet, Width 37 In, Depth 21 In, Height 20 In, Structural Foam, Black, With Key Lock | *$97.98 |
 | GB GS-385 6-1/2-Inch Long Nose Electrical Plier With Cutter And Crimper Brand: GB Model: GS-385 Part Number: GS-85 6" Elecrician's Needle Nose Plier, Cuts Strips Wire, Provides Crimping Stations For Solderless Terminals, Serrated Jaws Cushion Grips, Carded. | *$6.52 |
 | Smith and Wesson Folding Knife Tanto Powerglide Black Brand: Heartland GreatDeals Model: SWPGBT-M Part Number: SWPGBT-M The Power Glide offers a new-patented gear system designed to deploy the blade without the hassle of a thumb stud or notch. Featuring a 3.9", 440 stainless steel razor sharp blade and aircraft aluminum handle with Kryton inserts. | *$15.10 |
 | Channellock 447 Curved Jaw Diagonal Cutting Plier Brand: CHANNELLOCK Model: 447 Part Number: 447 Heat treated to hold its edge. Polished high-carbon drop-forged steel. Provides high leverage. U.S.A. | *$15.85 |
 | Laplander Folding Saw Brand: Bahco Model: BAH396LAP Part Number: BAH396LAP Manufactured by Bahco, a Snap On Company. Diamond cut teeth last longer than other saws. | *$30.94 |
 | #8000 Grit Ceramic (Melon) Professional Series Water Stone - Shapton Brand: Professional Series Our #12000 Grit Melon Professional Ceramic Water Polishing Stone will give a razor sharp edge with a mirror like polish. The stone is fired to a high temperature with a mixture of very fine #8000 abrasive and a clay binder. Unlike other water stones, it does not need to be soaked prior to use. Simply add water to the surface and start polishing. It is 8-1/4" x 2-3/4" x 5/8" and is shipped in a plastic storage case that can be used as a stone holder while sharpening. The base has rubber feet to give a non-slip surface. | *$117.50 |
 | Fanstel Professional Amplified Speakerphone (ST50) Brand: Fanstel Model: ST50 Part Number: ST50 Fanstel St50 Professional Amplified Speakerphone | *Too low to display |
 | General Tools 616 Flexible Industrial Straight Edge Ruler Brand: General Tools Mfg Co In Model: 616G Part Number: 616 General Tools 616 PRECISION 6" FLEX STEEL RULEGeneral Tools 616 PRECISION 6" FLEX STEEL RULE Features:; 5R Graduation - 32nds, 64ths; 10ths, 100ths; Ultra fine black graduations; Polished Stainless Steel finish; Length is 6" long; Width is 15/32"; Comes in a plastic case.; Precision made, with etched fine black graduation on stainless steel; 10 and 100 graduations on one side and 32 and 64 graduations on the other side; 5R grad type; 15/32" width; Carded | *$4.08 |
 | Empire e70.72 72-Inch Professional Aluminum Box Level Brand: Empire Level Model: e70.72A Part Number: e70.72 True Blue vials are accurate to within 0.00005in. per inch in all 10 level and plumb working positions. Solid block acrylic vials wont break, leak or fog. Heavy-duty aircraft aluminum chassis with 300deg view top-reading level vial and milled edges for accuracy. Rubber hand grips and rubber endcaps for shock resistance. Limited lifetime warranty. U.S.A. | *$69.97 |
 | Rockler Web Clamp Brand: Rockler Model: TABC-0202 Part Number: TABC-0202 You'll get secure holding power on irregular shapes with this durable web clamp. It features a tough nylon band rated for loads up to 1,000 lbs, plus a self-locking cam that guarantees a positive hold and instant release. Band is 1" W x 15' L. br br br | *$12.99 |
 | #000 X 40mm Phillips Screwdriver, Precision Series Brand: Wiha Part Number: 26102 Wiha Phillips Precision 261 SeriesExact Fit Precision Machined Tips Wiha High Performance CRM72 Tool Steel Blades Through hardened for optimum torque performance Micron Vapor Hard Chromed finish Handles Proportioned to Blade Size Slim tapered Finger Control Cap for precise turning Guaranteed Quality - Made in Germany | *$4.35 |
 | IRWIN 2015100 ProTouch? Multi-Saw (2-blades, HackWood Blade),PT Handle Brand: Irwin Model: 2015100 Part Number: 2015100 Extra thick blade is available in metal and wood. Ergonomic ProTouch handle provides comfort and control. Includes: (1) 10" 24T metal blade, and (1) 5 1 4" 10T work blade. | *$6.80 |
 | Bahco Snap On 9029 R US Big-Mouth ergo® Adjustable Wrenches 6" Brand: Bahco Features
Extra-wide opening jaws with shorter handle for maximum access in confined areas.
True ergo® design, with thermoplastic handle and larger grip width.
Ideal for plumbers, electricians, and maintenance workers.
Slim head with tapered jaws combine easy accessibility with extra turning strength.
Perfect for working under the sink, within enclosures, or anywhere that a short handle
is needed.
Precision hardened and anti-corrosion treated.
Measurement scale on head conveniently shows fastener size. | *$21.67 |
 | Gear Wrench 85108 1/4-Inch Combo XL Ratcheting Wrench Brand: GearWrench Model: 85108 Part Number: 85108 Get more torque and a stronger grip on fasteners. XL Combination is the only Ratcheting Wrench with the unique features of long length and patented Surface Drive technologies -- up to 25% more reach and 25% more torque. The new XL Combination Ratcheting Wrench from GearWrench -- when it comes to tough jobs you cant afford to come up short! Reach and Strength go to new lengths. Features: - 25% more length and a stronger grip on fasteners - Rounded beam for a more comfortable grip - Surface Drive technology prevents rounding of fasteners - 25% longer translates to 25% more torque when loosening difficult fasteners. - New Surface Drive Plus provides a sure grip on fasteners - Thicker box end handles the toughest applications. - 1/4" single | *$12.83 |
 | Spyderhawk, Yellow FRN Handle, Serrated Brand: Spyderco Part Number: C77SYL Blade Detail: Serrated. Blade Length (inches): 3.63. Blade Material: H1. Carry System: Pocket Clip. Handle Material: FRN. Lock Style: Lock Back. Overall Length (inches): 8.25. | *$71.89 |
 | Wiha 32396 13-Piece Proturn Insulated Pliers and Screwdriver Set in Case Brand: Wiha Model: 32396 Part Number: 32396 Proturn Insulated 13 Piece Set with Slotted Phillips Drivers, Pliers and Cutters | *$137.18 |
 | Klein 85090 Grip-It Screwdriver Set, 5-Piece Brand: Klein Model: 85090 Part Number: 85090 Since 1857 Klein Tools has manufactured the highest quality hand tools. Today, the Klein brand is the #1 preferred hand tool in the electrical industry, as well as one of the leading brands in the maintenance, construction and industrial trades. | *$44.95 |
 | General Tools DLM1337 Digital Light Meter with Jumbo Display Brand: General Tools Model: DLM1337 Part Number: DLM1337 bIdeal for Outdoor - Indoor Lighting./bbr /br /• 3-1/2 digit LCD displays LUX, FC, low battery, MAX HOLD indicationbr /• Accurately displays light level in foot candles (FC) or LUX over a wide rangebr /• Max hold and data holdbr /• Auto power offbr /• Easy to usebr /• Pocket sized and lightweightbr /• Cubic lead protectionbr /br /Includes:br /• Includes 6 AAA batteries br /• Sensorbr /• Hard casebrbrSpecifications:brMeasuring range: (±3% rdg ±5 dgts) br o 20, 200, 2000, 20,000 FC br o 200, 2000, 20000, 50000 LUX brAccuracy: ±3% rdg ±5% f.s. ±4% rdg ±10% dgtas (10000FC/LUX) brResolution: 10.1 LUX | *$91.00 |
 | Grip 5 pc 11" Long Nose Pliers Set Brand: Grip-On Model: 57048 Part Number: 57048 Ideal for use in intricate and confined working applications. Drop forged, heat treated steel with fully polished heads for easy cleanup. Double dipped, cushion grip handles.
Contents: 1 pc 11" straight long nose pliers, 1 pc 11" 90 degree angled nose long nose pliers, 1 pc 11" 45 degree angled long nose pliers, 1 pc 11" 20 degree angled long nose pliers, 1 pc 11" hose and cable pliers. Also includes heavy duty roll up pouch. | *$19.99 |
 | Klein J203-8N 8-Inch Journeyman Heavy Duty Long Nose Pliers, Yellow and Black Brand: Jensen Model: J203-8N Part Number: J203-8N Cutters, Pliers Accessories Type: Heavy Duty Long-Nose Tool Style: Stripper for #12 AWG Wire Jaw Length: 2-5/16 Overall Length: 8-7/16 | *$24.49 |
 | Sonin 10075 Laser Target Range Finder Brand: Sonin Model: 10075 Part Number: 10075 Take the guesswork out of ultrasonic distance measuring! Laser pinpoints target area for accuracy. Measures 18in. to 60 feet with accuracy up to 99.5% | *$29.94 |
 | Knipex 8701150 6-Inch Cobra Pliers Brand: Knipex Model: 8701150 Part Number: KNT-8701150 6 COBRA PLIERS | *$20.99 |