 | Keson KL1810330F Fast Rewind 330 Ultra-Glass Open-Reel 2-Sided Tape
Brand: Keson Model: KL1810330F | *$26.00 |
 | Swanson Tool T0119 Speedlite Square, Yellow
Brand: Swanson Model: T0119 Part Number: T0119
A durable square made of lightweight high impact plastic that will not mar work surfaces, ideal for home, it has many features of the Speed Square plus a center line guide for locating the center of round stock. One leg of the square is 1 1/2" wide allowing for fast stud layout, markings are raised for easy reading while "wear rims" protect the markings. 8.5"x8"x1.5" size. | *$2.59 |
 | Credit Card Multi-Tool - Laser Pointer, LED, Pen, Scissor
Brand: Senter
This is a winning combination of useful items packaged in a light-weight tool the size of a credit card just 3/16" thin. Place it on a horizontal surface, pull up and aim the goose-neck lamp, and focus on your work with both hands. Or hold it like a flashlight and switch between 1 and 2 LED power just like operating low and high beams in your car. But heres more light on the subject. A laser beam is here for you too to draw attention to a point in your presentation, to signal for help, or to exercise Fido (do be careful not to shine it in anyones eyes as lasers are harmful). And for your low-tech endeavors, you can jot a note with the ball point pen, measure the width of a hole with the ruler, and trim a little something with the scissors to patch it with. | *$2.87 |
 | PSI Woodworking LCBT4 4 Piece Bowl Turning Lathe Chisel Set
Brand: PSI Woodworking Model: LCBT4 | *$69.95 |
 | True Angle Protractor, 18" Desk Size
Brand: Quint Measuring System Part Number: 118
The Original True Angle tool is the worlds fastest and easiest angle making tool available. Just rotate the blades and read the dial. The hairline locates the exact angle within a tolerance of 5/1000ths. The blades rotate 360 degrees in both directions. To lock the blades, lightly tighten the finger nut. To unlock the blades rotate the top blade counterclockwise. The Original True Angle replaces every triangle, protractor, try square, bevel square, rafter square, framing square, combination square, or any other angle making template presently manufactured anywhere in the world. | *$16.95 |
 | Shop Fox D2838 7-Inch Deep Reach Pipe Clamp for 3/4-Inch Pipe
Brand: Shop Fox Model: D2838 Part Number: D2838
Cast iron, ribbed construction make these heavy-duty Pipe clamps ideal where deep reach is needed. Both use standard pipe with NPT threads. Ideal for case construction. (Pipe not included). | *$19.95 |
 | M-D Building Products 92379 24-Inch SmartTool with Module And Case
Brand: M-D Building Products Model: 92379 Part Number: 92379
Traditional bubble levels only see the world as level and plumb. Only SmartTool can measure any angle in a 360 degree range and provide you with an easy-to-use readout in degrees, % slope, or inch/foot. Instantly determine if ADA ramps, surface grading, or drains meet requirements. SmartTool can also be reset to factory accuracy at the touch of a button so your compliance is never in question. Includes padded carrying case. | *$110.07 |
 | Bondhus 20899 Balldriver GoldGuard Finish L-Wrench Double Pack, 38099 (1.5-10mm) and 37937 (.050-3/8-Inch)
Brand: Bondhus Model: 20899 Part Number: 20899
Hex Torx Keys, Drivers, Sets Tool Type: Ball End Keys Fastener Type: Balldriver Measurement Type: Inch/Metric Handle Type: L-Key Long Arm Hex Size Range: .050 - 3.8, 1.5 - 10mm | *$16.95 |
 | Smith's DFPK Diamond Precision Knife Sharpening Kit
Brand: Smith Abrasives Model: DFPK Part Number: DFPK
Includes: Diamond retractable sharpener. Folding rod guides. V-lock vise. Honing solution. Coarse diamond stone. Fine diamond stone. Fine Arkansas stone. Medium triangular shaped Arkansas stone. Fabric storage pouch. Includes: Diamond Retractable Sharpener, Folding Rod Guides, V-Lock Vise, Honing Solution, Coarse Diamond Stone, Fine Diamond Stone, Fine Arkansas Stone, Medium Triangular Shaped Arkansas Stone. Storage: Fabric Storage Pouch. | *$38.39 |
 | WATERSTONE WOODWORKER PACKAGE
Brand: Norton
This package contains the four most used waterstone grits for sharpening maintaining the edge on woodworking tools plus the flattening stone to keep the waterstones flat. The package also has the "The Sharpening Woodworking Tools" DVD plus Norton waterstone sharpening instructions. | *$119.99 |
 | Newborn Brothers 250 1/10-Gallon Super Smooth Rod Caulk Gun
Brand: Newborn Brothers Model: 250 1/10GL Part Number: 250 | *$16.00 |
 | GearWrench by Danaher 82106 Double X Plier Set - 2 Piece
Brand: GearWrench Model: 82106 Part Number: 82106
Item #: KDT82106. pbFeatures Benefits/bulliCompound joint allows access with minimal handle movement, jaws open greater distance than the handle for added reach in tight locations/liliFlush rivet for strength and narrow profile/liliDual dipped grips for comfort and grip/liliAligned serrated tips for precision gripping/liliCorrosion resistant alloy steel/li/ulMaximum reach without exceeding center point of interference. Set includes: 13" straight Double-Xâ„¢ pliers with 3" jaw capacity and 12.75" 45 degree Double-Xâ„¢ pliers with 1.75" jaw capacity. Packaged in a tray. brCustomers also search for: Discount 2 Piece Double-XT Pliers Set, Buy 2 Piece Double-XT Pliers Set, Wholesale 2 Piece Double-XT Pliers Set, 099575821165, ToolWeb, Pliers | *$27.48 |
 | Rotary Blade Refill
Brand: Olfa Model: 9458 Part Number: RB60-5
Don't be caught with a dull edge - stock up on spare blades. | *$3.79 |
 | Wiha 32090 4 Piece 1000 Volt Slotted Phillips Insulated Screwdriver Set
Brand: Wiha Part Number: 32090
Wiha Insulated Slotted and Phillips Screwdriver Screwdriver Set 4 pc. Set includes Slotted: 3.5, 4.0 and Phillips Screwdriver: 1, 2. Insulation according to ASTM F-1505-01, New VDE Specification 0682/part 201 and IEC 900, each tool individually tested to 10,000 volts and certified to 1000 volt ac or 1500 volt dc. Blade high alloy chrome-vanadium-molybdenum steel, hardened, black finish. Insulation molded directly onto blade. Wiha SoftFinish cushion grip handle features advanced technology dual material molding. | *$20.79 |
 | Bessey KBX20 K Body Clamp Extender
Brand: Bessey Model: KBX20 Part Number: KBX20
Besseys K-Body Clamp Extender makes it possible for you to extend your clamps capacity to fit all your clamping needs. Simply join any two K-Body clamps with this clamp extender using the included nuts, bolts, and washers to create custom length clamps. Extender is made of durable aluminum for rigid accurate linkage. A special slot in the extrusion mirrors the unique bar profile of the K-Body clamp to eliminate twist and independent movement. Integral "feet" in the extender work with the clamp to rest naturally on work surfaces to allow for flat glue-ups and stock layout, and each extender is anodized to prevent reaction with glue. Works with both Bessey K-Body clamps and Woodcrafts WoodRiver parallel clamps, so they can even be joined with each other. | *$14.95 |
 | Proxxon 28020 2-Inch HSS Saw Blade for KS 115
Brand: Proxxon Model: 28020 Part Number: 28020
HSS Saw Blade Ø 2" (50 mm) x 1/64" (0.5 mm), bore 13/32" (10 mm), fine, 100 teeth. The blade is ideal for fine precision cuts in non-ferrous metal (aluminum, brass, copper), wood and plastic. | *$6.79 |
 | Klein 11046 Wire Stripper/Cutter Red 6 1/4 Inches
Brand: Klein Model: 11046 Part Number: 11046
6" long. Compact, lightweight strippers gauge, cut, strip, and loop wire. Spring loaded, self opening action. Flat design, narrow nose. Strong, hardened steel with precision ground stripping holes. Clear gauge markings on both sides. Black oxide finish. P | *$8.78 |
 | Stanley 21-296 Surform Plane, Regular Cut Blade
Brand: Stanley Model: 21-296 Part Number: 21-296
Regular cut blade. Forms and trims wood, plywood, composition board, asphalt tile, hard rubber, plastic aluminum, brass. Aluminum body, 10" long with solid hardwood handle and knob. Uses replacement blade model No. 21 293, 21 299 and 21 393. | *$10.95 |
 | Channellock 358 8-Inch End Cutting Plier
Brand: CHANNELLOCK Model: 358 Part Number: 358
8" End Cutting Nipper Pliers Perfectly mated cutters, scientifically heat treated to hold their edge. Precision made of fine polished, high carbon steel. CHANNELLOCK BLUE comfort grips. | *$16.52 |
 | Dremel 543 1-1/4 inch Cutting/Shaping Wheel
Brand: Dremel Model: 543 Part Number: 543
For shaping and cutting wood, plastic, fiberglass, and laminates. Cut off wheels make it easy to cut or shape thin wood and plastic. Mandrel included. Do not use on metal. | *$9.48 |
 | Cold Steel Bokken Md: 92BK
Brand: Cold Steel Part Number: 92BK
Cold Steel Bokken, Hundreds of years ago, the Japanese discovered a simple truth; that to become a good swordsman you'll have to practice, a great deal. To become a great swordsman you'll have to practice with a "live blade". And during the period between 'good' and 'great', you should spend your time building your skills and confidence enough to wield a razor sharp Katana safely and effectively. To accomplish this, the Japanese relied on a simple wooden sword called a "bokken" for much of their training. It was made from the super tough wood of the Japanese Green Oak tree, a wood they called Kashi. The swords produced from this wood had the advantage of replicating the size, weight and feel of a steel sword, while minimizing the possibility of causing grievous or permanent injury to those who used it. Authentic Kashi wood bokkens are still used today, but are becoming quite costly. They also have the disadvantages, being made of wood, that they may rot, crack split or splinter. Cold Steel's solution to these dilemmas was to design a synthetic substitute, low in price and impervious to the elements. This bokken is made of the heaviest grade polypropylene available and closely duplicates a real Katana in length, size, weight and feel. And while it is not quite as rigid as wood, it has the advantage of being virtually unbreakable as well as remarkably stiff and cut resistant. And, when you're ready for a "live blade", your bokken is still a great candidate as a "last ditch" hide out weapon that can be hidden just anywhere inside or outside your house. Specifications: - Weight: 17.7 oz - Thick: 1" - Length: 30" - Handle: 11 1/2" long. - Material: Polypropylene w/ New hand guard - Overall: 41 1/2", Mfg No: 92BK, Manufacturer: Cold Steel, Warranty: Cold Steel stands behind their knives 100%. The fixed blade sheath knives have a five-year warranty to the original owner against defects in mate | *$20.65 |
 | SOG Specialty Knives Tools VS-02 Visionary II Knife, Black Powder Coat
Brand: SOG Specialty Knives Model: VS-02 Part Number: VS-02
SOG Knives Visionary Knife II, Tactical and Stylish" is the theme behind the Visionary II. This folder features the same spectacular blade design of the Spec Elite series, with the handle of an X-Ray Vision! The Visionary II is the newest member of this high-tech family of folding knives and was created for optimal performance and value. Better still, this knife is further enhanced with our revolutionary Arc-Lock for fast-access and full "lockup." The Visionary II keeps a low profile with its low-reflectivity Black Powder coat finish and glass-reinforced black Zytel handle, keeping it lightweight and comfortable to hold and carry. A reversible clip allows both righties and lefties to carry the Visionary II conveniently in pocket and pack or on vest, belt or jacket. Specifications: - Blade Length 3.75" - Overall Length 8.37" - Weight 4.3 oz. - Edge Straight - Steel VG-10 - Handle Zytel w/stainless liners, Mfg No: VS-02, Manufacturer: SOG Knives | *$90.39 |
 | Michigan Industrial Tools MIT 3 pc 3/8" Dr. Long Extension Bar Set
Brand: Michigan Industrial Tools Model: 1610 Part Number: 1610
MIT 3-PC. 3/8" DRIVE EXTRA LONG EXTENSION BAR SET features: * Drop Forged Carbon Steel * Heat Treated and Chrome Plated * Fully Polished * Spring-Loaded Ball Bearings Hold Sockets Securely * Notches on Extensions Lock onto Ratchet Drive * 3-pc. 3/8" Dr. E | *$14.99 |
 | Michigan Industrial Tools 3 piece 1/4" Drive Extension Bar Set
Brand: Michigan Industrial Tools Model: 1595 Part Number: 1595
MIT 3-PC. 1/4" DRIVE EXTENSION BAR SET features: * Drop Forged Carbon Steel * Heat Treated and Chrome Plated * Fully Polished * Spring Loaded Ball Bearings Hold Sockets Securely * 3-pc. 1/4" Dr. Extensions: 3", 6", 9" | *$3.48 |
 | SE Adjustable Screw On Pin Watch Case Opener
Brand: SE Part Number: JT6341W
15 Pins (5 Sets of 3 Pins) Pins Can Be Screwed Into The Handle To Firmly Secure Them. This Case Opener Can Open: - Cases with Holes - Oyster Cases - Polygonal Cases - Slotted Cases - Rolex Watches Stainless Steel | *$10.20 |
 | Channellock 528 8-Inch Slip Joint Plier
Brand: Chanellock Model: 528 Part Number: 528
Thick nose pliers. Shear type wire cutter. Precision made of fine polished, high carbon drop forged steel. Patented PermaLock fastener eliminates nut and bolt failures. Channellock Blue dipped plastic grips. No. 526: 6" No. 528: 8" | *$8.09 |
 | Leatherman 64440101K Special Edition Key Chain Tool, Red, White and Blue Micra
Brand: Leatherman Model: 64440101K Part Number: L64440101K
The Micra® Red White and Blue multi-tool from Leatherman® has 10 useful tools, including spring-action scissors. It fits on your keychain or is perfect for a tackle box, pocket, purse or fanny pack. | *Too low to display |
 | Ace Extractor Damaged Nut/Bolt Remover (XSB.100A)
Brand: CJTITAN LP Part Number: XSB.100A
Sold as each. 5 piece set. Xtractor easily removes stripped, rounded, rusted, damaged, painted over or just plain stuck nuts, bolts and studs. Pass through design for use over any length bolt or stud. 18-30 gripping teeth for immediate gripping action. Quick release feature: tap from back and fastener releases. Can be used with sockets, open box end wrenches, pliers and adjustable wrenches. Clamshell. Grip Range: 1/4" To 1/2". Manufacturer's number: XSB.100A. Country of origin: United States. Distributed by . | *$20.99 |
 | General Tools NGD268 Natural Gas Detector, 3 Color
Brand: General Tools Model: NGD268 Part Number: 318-NGD268
General Tools NGD268 Portable Gas Leak Detector (1 EA) | *$182.00 |
 | Victorinox / Forschner 8" Chef's Knife Fibrox Red Handle No. 40421
Brand: Victorinox Model: 40421 Part Number: 40421
The R.H. Forschner collection has grown in size and stature since its name was first carved in steel in 1855. Historically a premier choice of culinary professionals, it is still preferred by professionals today.
Renowned for its extremely sharp, Swiss made, steel blades from Victorinox, R.H. Forschner provides professionals in food processing and preparation with superior quality, value-priced cutlery that enhances performance and increases productivity. They are manufactured in Switzerland. The renowned rosewood handles feature a carved handle design with the unique beauty of natural rosewood and are extra durable. The fibrox handles feature a non slip, ergonomic design and are NSF approved. The blades feature a high-carbon no stain steel with the unique Victorinox polished surface and a taper ground edge. You can choose from a complete collection of cooks knives from 6" to 13" blades and the fully forged knife offerings in each category are manufactured exclusively for R. H. Forschner in Solingen, Germany.
Did You Know:
A Granton edge, or "kullenschiff" edge, has hollowed out grooves on the sides of the blade. These grooves fill with the fat and juices of the product being sliced, which allows for thin, even cuts without tearing or shredding the meat.
**The NSF mark is a certification of quality assurance and hygienic design. The National Sanitation Foundation mark is proudly carried on all R.H. Forschner blades with a fibrox or nylon handle and assures you of quality and assurance to use in a commercial environment. Look for this mark. Realize that most manufacturers do not carry this seal! | *$27.02 |
 | New 24" Rolling Magnetic Sweeper Pick Up Tool Magnet Picks Up to 30lbs
Brand: Sky Enterprise USA
You are viewing a Brand New 24" Rolling Magnetic Pick Up Sweeper. This sweeper can lift up to 30lbs at once, We purchased this sweeper directly from the manufacture, providing you with the best prices available.p liBrand new in retail packaging liDurable and strong aluminum and steel construction liLifts up to 30lbs at once liQuick release magnet handle for easy removal of debris liSpring loaded quick release handle extends from 31" to 45" liOperates over a variety of surfaces liTwo 7" wheels provide smooth maneuverability liHandles removes for easy storage | *$29.00 |
 | Advanced Tool Design Model ATD-352 200 Piece Spring Assortment
Brand: ATD (Advanced Tool Design) Model: ATD-352 Part Number: ATD-352
Includes (12) assorted sizes. | *$5.06 |
 | Wide Blade Scraper (OLD1970) Category: Scrapers
Brand: Old Forge Part Number: 1970
Item #: OLD1970. pbFeatures Benefits/bulliBlade width is 2"/lili.401 Shank/liliLength: 8.5"/liliMade In USA/liliRemove gaskets, rust, undercoating, paint, floor tile face area/li/ulRemove gaskets, rust, undercoating, paint, floor tile face area. Blade width is 2". brCustomers also search for: Tools and Storage\Hand Tools\Scrapers, Scraper Sets and Accessories\Scrapers Discount Wide Blade Scraper, Buy Wide Blade Scraper, Wholesale Wide Blade Scraper, 762869019707, ToolWeb, Air Hammer Chisels | *$9.90 |
 | Ontario - Heavy Duty Machete, 22 in., Black
Brand: Ontario Part Number: OKC22
22 in. 1095 black oxide coated full tang steel blade. Black high impact shatterproof polymer handles with steel compression rivets. 27.5 in. overall. | *$36.99 |
 | Tinker Multi-Tool Red
Brand: Victorinox Model: 56101 Part Number: 56101
Tinker Multi-Tool Red | *$9.99 |
 | Dasco #640 24" Shingle Ripper
Brand: Dasco Model: 640 Part Number: 640
24" Shingle Ripper, Will Remove A Single Shingle Without Damaging Either The Piece Removed Or Surrounding Pieces. For All Types Of Shingles, High Carbon Steel. | *$17.31 |
 | Advanced Tool Design Model ATD-425 4 Piece Adjustable Wrench Set
Brand: ATD (Advanced Tool Design) Model: ATD-425 Part Number: ATD-425
Contains: 6", 8", 10", and 12" adjustable wrenches. | *$16.63 |
 | Lisle 26650 T-55 Torx Bit Socket
Brand: Lisle Model: 26650 Part Number: 26650
Torx bit sets sizes for all automobile applications include sizes T-10 through T-60. This is 1 of 12 sizes. | *$2.59 |
 | Murphy Knife
Brand: Murphy
Preferred by beginner and experienced carvers alike. Easy to sharpen and holds an edge. Handle is 4 7/8" long and is shaped for the best fit in your hand. Knife comes sharpened. Remember, only use strop on the knife once it is sharpened unless you break or chip the blade. MADE IN USA. | *$14.50 |
 | Extech RH300 Humidity Meter with Dew Point
Brand: Extech Model: RH300 Part Number: RH300
Max/Min readings; Auto power off to save battery life --- Includes: 2 - AAA batteries | *$89.99 |
 | Bessey SVH400XL SVH Flooring and Clamping System
Brand: Bessey Model: SVH400XL | *$33.95 |
 | Tajima PZB-400GP Plumb-Rite 14-Ounce Bob Setter with Steel Reinforced Pin Striker
Brand: Tajima Model: PZB-400GP Part Number: PZB-400GP
Elastomer-wrapped universal plumb bob setter with commercial-grade 14 oz. bob. New steel reinforced setting pin to be used with a hammer when tacking into wood and drywall at heights above-head. Strong magnet for attaching to steel frames and ribbed eyelet to hook onto nails or studs. Braided nylon line extends and holds at lengths up to 14-1/2 ft., retracts into case automatically. Internal "flush pin" for zero distance measurements with plumb line flush with surface. Unique plumb bob features a quick-stabilizing cap that reduces bob wobble and spin. Bob also featured embedded elastomer side bumpers and a thick tip guard. Adjustable for bobs weighing from 3.5 oz to 35 oz. | *$27.40 |
 | Kastar B10A 5/16" Side Terminal Battery Wrench
Brand: Kastar Model: B10A Part Number: B10A
Kastar 5/16" side terminal battery wrench has a insulated handle to prevent electrical shock and good grip when in tight places. The reversible ratcheting box wrench allows for quick and effective terminal bolt removal. | *$5.10 |
 | Stabila 30001 Leather Holster for 25010 25100 Levels
Brand: Stabila Model: 30001 Part Number: 30001
Stabila Diecast Torpedo Level: Leather Holster for Torpedo (25100,25200) | *$6.88 |
 | Grip 38 Piece Letter Number Punch Stamping Set
Brand: Grip Model: 61158 Part Number: 61158
complete letter number kit | *$15.00 |
 | 5x Spectacle Eyeglass Magnifier Loupe Glasses Optical Tool
Brand: Senter
New Clip On Loupe 5X
* This is a new clip on 5X loupe
* This loupe easily attaches to the frame of any pair of regular eyeglasses
* It has a focal distance of 2" (51 mm) | *$2.75 |
 | Arrow Fastener HTX50 Pro Hammer Tacker
Brand: Arrow Model: HTX50 Part Number: HTX50
Arrow Fastener Co. HTX50 Hammer TackerArrow Fastener Co. HTX50 Hammer Tacker Features:; Hammer tacker; Jam proof mechanism; Precision locked rear loading; Retractable striking edge; Specially designed ergonomic grip | *$39.00 |
 | Plastic Pipe Ram Bit - 2 in.
Brand: Pasco Model: 3244 Part Number: 3244
Makes in-line repairs and installations. Reams plastic pipe squarely and accurately below the surface or finished grade. Ram Bit leaves fittings clean and ready for solvent welding | *$18.99 |
 | 0-1" Dial Indicator With Magnetic Base
Brand: Peachtree Woodworking
With a flip of a switch its magnetic base locks itself in place onto the surface of your tool. The "spring" extension are of the base can then be adjusted to position the indicator tip just where you want it for measuring within .001". | *$39.99 |
 | M-D Building Products 49829 Epoxy Grout Float
Brand: M-D Building Products Model: 49829 Part Number: 49829
GROUT FLOATMultiple grouting float for job specific applications. Include ergonomic TPR handles. | *$6.63 |
