Johnson Level Tool 2300 4-Inch Trim Gauge
Brand: Johnson Level Tool   Model: 2300   
*$7.49
Striker 00-102 Carbide Utility Score
Brand: STriker   Model: 00102   Part Number: 00102
The New Striker® Carbide Utility Score is The Preferred Way To Cut Fiber Cement Siding Eliminates Creating Fiber Cement Dust The new Striker® Carbide Utility Score allows easy scoring and snapping of a variety of materials, and is the preferred, safe method for cutting carcinogenic fiber cement siding (Hardie® Board). The Striker® Carbide Utility Score features a sharp v-shaped carbide scoring tip designed to scribe deep and wide cuts with minimal force into fiber cement siding, backer board, roofing, linoleum, laminates, plastics, and glass. Though it won't replace gang cuts of siding with saws, by using the Striker® Carbide Utility Score, contractors and installers can safely cut fiber cement indoors and in tight or remote areas, such as on scaffolding, without creating dust. Additional features include a crosscut file located along both sides of the hardened steel blade, allowing the user to smooth out any rough edges, and often eliminating the need to pull out a file or rasp. Serrations along the blades top edge create a notching saw that makes quick work when cleaning out corners around plumbing, junction boxes, and HVAC openings. The tool also features a striking cap at the end of its sleek, ultra-light aluminum handle that acts like a hammer to allow the user to knock out cut pieces and set siding nails to the correct depth. The folding blade and removable pocket clip means the tool fits easily on a belt or in a pocket or pouch. The new Striker® Carbide Utility Score also has a thumb stud to safely open and close the blade, and a spring steel lock to securely lock the blade open or closed the blade folds completely inside the body of the tool. A designed-in thumb rest supports and adds comfort to the thumb and hand to reduce user fatigue.
*$13.42
Malco FCG2 1-1/4 Inch Overlap 5/16-Inch Thickness Fiber Cement Siding Gauge, 2-Pack
Brand: Malco   Model: FCG2   Part Number: FCG2
*$17.77
Wiha 28581 Bit Holder Adapter For 1/4-Inch Drive Bits
Brand: Wiha   Model: 28581   Part Number: 28581
Bit Holder Adapter For 1/4 Drive BitsSize: 1/4", Length: 149mm,width: 4.0mm Shaft CVM steel, hardened, corrosion protected.
*$7.38
General Tools 29 Plastic Protractor and Angle Finder with Articulating Arms
Brand: General Tools   Model: 29XXX   Part Number: 29
Protractor angle finder to measure and mark the degrees of an angle on outside, inside, and slopped angles. Fine black graduations from 0 to 80 in opposite directions. Brass lock nut.
*$3.52
2008 Leatherman Skeletool CX Carbon Fiber Handle Multitool and Knife
Brand: Leatherman   Model: 830950   Part Number: LT830950
Today s outdoor enthusiasts want to keep weight and volume to a minimum without sacrificing quality and true functionality. While multi-tools have multiple options, they re often heavier with more features than are used on a regular basis. Conversely, pocket knives are light and streamlined, but render themselves useless when necessary adjustments call for a tool. Enter the new Skeletool platform: Minimal weight, compact size and endless capabilities.
*Too low to display
Leatherman Crater c33Lx Combo Straight/Serrated Blade Knife
Brand: Leatherman   Model: 8601240   Part Number: 8601240
Features: 420HC Stainless steel, Drop-point combo straight/serrated. Bottle opener/carabiner clip, removable pocket clip. 60% glass-filled nylon. Blade Launcher; thumb stud. Locking liner.
*$20.05
Black Decker BDL220S Laser Level
Brand: Black Decker   Model: BDL220S   Part Number: BDL220S
Manual Laser Level, 360 Degree Rotating Base, 2 Large Bubble Vials With Backlight, Includes Battery Case.
*$14.71
Channellock 460 4-1/4-Inch Jaw Capacity 16-Inch Tongue and Groove Plier
Brand: CHANNELLOCK   Model: 460   Part Number: PL-CL16
Channellock pliers have patented Safe-T-Stop feature to prevent pinched fingers. Lower jaw combbines with expanded reinforcing rib to prevent handles from contacting each other. Drop-forged alloy steel. U.S.A.
*$19.60
Estwing 16-Inch Steel Campers Axe #E44A
Brand: Estwing   Model: E44A   Part Number: E44A
*$42.47
Wiha 28582 Square Drive Adapter For 1/4-Inch Sockets
Brand: Wiha   Model: 28582   Part Number: 28582
Extensions For System 4 Handle, Long 1/4" Socket Holding Adapter.
*$4.66
DMT A4X 4" Diamond Whetstone For Use With Aligner
Brand: DMT (Diamond Machining Technology)   Model: A4X   Part Number: A4X
Guided strokes exact edge bevel give a consistent angle to produce the ultimate in fast, accurate knife sharpening. 7 angle variability, handle accepts any 4'' Diamond Whetstone. QuickEdge Aligner Kit w/two 4'' diamond Whetstones. Includes fabric storage pouch. NOTE: 4'' Diamond Whetstone- when used w/AHF can be used w/other brands of knife clamps.
*$13.24
All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track
Brand: E. Emerson Tool Co   Model: U-54   
*$59.99
Stanley 77-188 S2 Laser Level Square
Brand: CST/Berger   Model: 77-188   Part Number: 77-188
The Stanley laser speed square is a simple-to-use layout tool that projects horizontal and vertical laser lines on variety of surfaces. Application: Angles, Accuracy: 1/2in. at 30ft., Range (ft.): 50, Battery Included: Yes, Battery Type: AA, Kit Includes: Speed square, adhesive putty
*$32.99
Gear Wrench 9008 1/4-Inch Combination Ratcheting Wrench
Brand: GearWrench   Model: KDT9008   Part Number: 9008
The small ratcheting box end design allows access to tight spots where a ratchet and socket or a conventional ratcheting box end will not fit. The GearWrench moves a fastener along any length threaded rod without ever having to remove the wrench from the fastener. Surface Drive box end virtually eliminates the rounding of fasteners.
*$8.39
KD Tools 3704 45-Degree Hog Ring Pliers
Brand: KD Tools   Model: 3704   Part Number: 3704
Hog Ring Pliers - 45deg Spring loaded. Applications: Hog rings, fence joining, crab traps upholstery.
*$15.15
400-EYELETS W/ HEAVY DUTY PUNCHING-SETTING PLIER
Brand: Hawk   Part Number: 1
BRGrommets and eyelets come in pewter color, gold color, silver color and copper color. Heavy duty plier best for leather and vinyl, but works with just about everything.BR-SKU (MODEL#): TP-14444. -Manufacturer: Hawk. -Material: Steel.. -Usage: Professional Use.. -Package Dimension: 9.25" X 8" X 1".BR
*$10.15
Milwaukee 0928-29 28-Volt Lithium-Ion Cordless 4-Tool Combo Kit
Brand: Milwaukee   Model: 0928-29   Part Number: 092829
*$629.99
Winchester 22-09435 2.25" Clip Folder Serrated
Brand: Gerber   Model: 22-09435   Part Number: 2209435
Surgical steel serrated 2.25in. blade. Stainless steel bolster has wood inlaid highlights and attached pocket clip. Limited lifetime warranty.
*$7.43
Tooluxe Pro-Grade 3-1/2 Inch Philips Screwdrive Bits Extension with Magnetic Tip, 1/4" Hex Shank (Pack of 5)
Brand: Tooluxe   
Perfect for homeowners, mechanics, DIYers and more!
*$6.99
Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold Blue Anodized) with One Piece colored or white Standard 3/8" School Chalk in Each Holder - SAVE 5% and Receive FREE F
Brand: Commando   Model: 152-CH / 152-1635   Part Number: 152-1635
SPECIAL OFFER VALUE PACK, Save 5% + Receive free High Lighter. Three Chalk Holders: 1 each of Pro Series Clear, Gold Blue Anodized Bodies with one pieces of standard colored or white 3/8" Diameter Chalk in each holder. PLUS receive a Free Fluorescent HighLigher. Handle has Non-Slip Finger Grip surface on body and chuck nut for better control when writing and aids in removing or replacing chalk. Hole in top of handle for easy removal of broken chalk. Made In USA. (Des.Pat.No. D416,777) SUGGESTED USES: Helps prevent broken chalk and a convenient way to firmly hold chalk and keep hands free of chalk dust. Makes a great Gift.
*$16.95
Jeweler's Solid Steel Bench Block - 4" X 4"
Brand: Sona   
*$21.49
Goldblatt G15857 Blade Runner Holster
Brand: Goldblatt   Model: G15857   Part Number: G15857
Attaches to tool belt with belt loop or clip options. Has space for 2 replacement blade cartridges. Elastic sides allow for easy tool removal.
*$11.69
Nocord Digital Torque Control Wrench DigiWrench WWT-1430
Brand: Gateway Marketing   Model: WWT-1430   Part Number: WWT-1430
Digital Wrench, with its patented Anti-Clutch system and digital torque control eliminates the hassle of loosening and tightening lug nuts, even those that have been tightened by a mechanic or at the factory. With the help of digital readout screen, control the amount of torque you need up to 250ft/lbs and you can easily tighten or loosen your lug nuts. The DigiWrench, a Digitally Controlled 12 Volt DC DIY Impact Wrench, is the only impact wrench of its kind in the world, allowing you to digitally select your desired amount of torque. This torque wrench has a 1/2 drive 250 Ft-lbs ratio. With 4 socket sizes, you dont have to worry about it being a perfect fit. The sockets themselves are specially designed to compensate for over and under tightening. The patented digital torque control with LED display will allow you to easily adjust the torque settings according to your needs. The Patented clutch system works to prevent backlash and to reduce overall power consumption. And just in case, nut wrench comes with a replacement fuse. This torque control wrench is dark grey in color and comes in blow mold case.
*$53.36
Tweezer Set, Economy 5 Piece Set
Brand: Hawk   Part Number: S8642A
Here's the tweezer set for both professionals and personal grooming. Tweezers measure appx. 4 3/4" in length; tips include blunt bent, blunt straight, blunt sharp, paddle and squared edges. Use for removing splinters, grooming eyebrows, manicures and more. -SKU (MODEL): S1-08642. -Manufacturer: Hawk. -Material: Stainless Steel.. -Usage: Professional and Home Use.. -Package Dimension: 4" X 5.75" X 0.25".
*$6.22
KLEIN TOOLS Adjustable Wrench, 6", Black Finish Part No. 508-6
Brand: Klein Tools   Part Number: 508-6
Drop-forged and heat-treated alloy steel for maximum strength and light weight Opening Size = 3/4 in [Max] Opening Type = Jaw Head Angle = 15 Hook Hook Overall Length = 6 in Handle Type = Plastic-Dipped Material = Forged Alloy Steel Finish = Black Oxide Jaw Packing Type = Adjustable Wrench
*$14.46
PacTool International SA902 2-Piece Gecko Gauge Fiber Cement Siding Gauge
Brand: Pacific International   Model: SA902   Part Number: SA902
Save time and money installing fiber-cement siding with the Gecko Gauge. Using the handy siding gauge, one person can install siding quickly while ensuring each course stays level. It will help you produce a consistent siding reveal. Adjusts for a 5", 6", 7" or 8" reveal. Sold in a set of two.
*$62.99
Irwin Industrial Tools 26377 117-Piece Machine Screw with Fractional or Metric Tap and Hex Die Set with Drill Bit Set
Brand: Irwin   Model: 26377   Part Number: 26377
Tap Die - Threading Sets Size Range: 4-40 to 1/2-20, M3 to M12 Thread Size Range: 6-32 - 1/2-18; 3mm - 12mm Material: High Carbon Steel
*$234.45
SE Leather Punch, 9pc Hollow w/Case
Brand: SE   
Punch Set. Punch 1/8" to 1/2" holes in leather, balsa wood, etc., with this set of (9) steel punches. The punches, which come in a fitted black-plastic carrying case, are 1/2", 7/16", 25/64", 3/8", 5/16", 1/4", 3/16", 5/32" and 1/8". They are 3-1/4" to 3-3/4" long, with knurled grips, imprinted sizes, and side slots to allow the slugs to fall out.
*$8.50
General Tools 300/1 6-Inch Flex Precision Stainless Steel Rule
Brand: General Tools Mfg Co In   Model: 300/1   Part Number: 300/1
General Tools 300/1 PRECISION 6" FLEX STEEL RULEGeneral Tools 300/1 PRECISION 6" FLEX STEEL RULE Features:; Graduation - 32nds, 64ths; Dec. Equiv; Ultra fine black graduations; Polished Stainless Steel finish; Length is 6" long. Width is 15/32"; Convenient Pocket Clip; Comes in a plastic case.; Precision made, with etched fine black graduations, on satin chrome stainless steel ruler; 32 and 64 graduation on one side and decimal equivalent on the other; 15/32" width; 6" flex length; Carded
*$2.20
Swanson Tool TL011 9-Inch Speedlite Torpedo Level
Brand: Swanson   Model: TL011   Part Number: TL011
High-impact ABS frame. 0º, 45º and 90º vials. Grooved for pipes.
*$1.94
Black Decker BDSL30 24-Inch 3-in-1 Gecko Grip Level
Brand: Black Decker   Model: BDSL30   Part Number: BDSL30
Uses: Ideal for hanging pictures, shelves, decorative items, any basic leveling application, leveling projects that require different size levels (9" 24" Levels), locating studs (stud sensor built into 9" level).
*$19.95
Stanley 43-624L 24" FatMax Xtreme Box Beam Level
Brand: Stanley   Model: 43-624   Part Number: 43-624
FatMax Xtreme box beam level has a 20% stronger box beam cross section than the FatMax levels. It has dual machined leveling surfaces, bi material handgrips, which are screwed to frame, and impact resistant protective end caps. The vials are solid acrylic
*Too low to display
DEWALT DG5139 Heavy-duty Hammer Holder
Brand: DeWALT   Model: DG5139   Part Number: Custom LeathercraftDG5139
Dewalt hs hammer holder. Steel loop cardle helps stabilize hammer. Ballistic poly material provides strength and durability. Added padding helps keep handle away from body. Fits belts to 3-3/4" wide.
*$4.89
Black Batman Batarang Shape Dark Knight Dbl Edge Sharp Folding Knife
Brand: qswords   
Up for sale is a brand new Batman folding knife with twin razor sharp stainless 440 blades. Item has black finished ABS handle shaped like a Batman logo and imprinted with a silver Batman logo on it. When folded, this knife has a shape of Batman's batarang. The twin blades are black finished except the edge portion, and they have liner lock mechanism and thumb studs. The batman knife comes with a belt clip. The knife is measured at 5-3/4" when blades are closed, and 11" with blades open. The item comes with the original gift box..
*$7.49
Neiko Tools USA 4 piece Professional Pry Bar Set
Brand: Neiko   Model: RI-00246A   Part Number: 00246A
Neiko Tools USA 4 piece Professional Pry Bar * 7/16" x 24", 7/16" x 18", 3/8" x 12", 9/32" x 8" * Drop Forged * Fully Heat-Treated
*$9.99
Rockler Universal Fence Clamps
Brand: Rockler   Model: TAFC38   Part Number: TAFC38
These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary fence, keeping it out of the way. That means no more clunky wood screws and C-clamps and no need to screw into your expensive fence! Works great for table saws, band saws, cutoff saws, router fences and more. Clamps can be used singly as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures. One set of clamps will do it all! Includes 2 clamps. br br
*$14.99
The Original Pink Box PB36LI 3.6-Volt Lithium Ion Battery Cordless Bit Driver
Brand: The Original Pink Box   Model: PB36LI   
*$24.99
LEATHERMAN Leather Sheath for Juice Packaged Model 930905
Brand: Leatherman   Model: LP11   Part Number: LP11
Leatherman tools came about as Tim Leatherman, founder of Leatherman Tools, traveled abroad. Leatherman traveled abroad in a 1969 Fiat. During their travels it was discovered that the car was cranky and had leaky pipes. Leatherman conceived of the idea of a pocket survival tool. He worked in the basement of his home to create this tool. He wanted a tool with full size pliers with a pocket knife. Leatherman created the multipurpose tool calling it Mr. Crunch to which he received a patent for this. Sales grew and Leatherman introduced another tool. This one has more features with all locking blades. Then Leatherman decides to go small. The ultra tiny micra becomes and remains the category's top seller. Be sure to check out the Leatherman Surge Multi-Tool with Black Nylon Sheath. With these features, plus Leatherman's strongest scissors yet, Surge is sure to make a splash at the work site. The Leatherman Charge XTi Multi-Tool with Premium Nylon Sheath. The perfect tool for the most ambitious outdoorsman or the most demanding professional. And look at the Leatherman Removable Bit Driver with Black Nylon Sheath. Very convenient and easy to tote.
*$2.75
Channellock 3 Piece 9-1/2-Inch, 6-1/2-Inch, and 12-Inch Tongue and Groove Plier Gift Set
Brand: CHANNELLOCK   Model: GS-3   Part Number: GS-3
Sets - Cutters, Pliers Accessories Type: Plier Set Contents: 6-1/2, 9-1/2 12 In. Tongue and Groove Container Type: Display Card
*$39.11
Premium DIAL INDICATOR + MAGNETIC BASE w/FINE ADJUSTMENT + 22 pc Indicator Tip POINT SET - AGD SPEC
Brand: Unknown   Part Number: AT201866
br Professional Precision Tool Set! brbr Dial Indicator: Fine tune your machinery by adding a dial indicator to your set of tools. This 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case. brbr Features: brbr ul liEasy to read 2-1/4'' white face with black markings liCrisp graduations liDurable satin chrome finish liSpindle rack pinions and gear trains are made of high quality steel components ensuring long life liBuilt to AGD specifications liVertical lug back configuration liGraduations: 001'' per line, 0.1'' per revolution /ul brbr Magnetic Base: Attach this powerful magnet to flat or round surfaces. Reach as far as 12'' with multi-positional joints and easy-adjusting posts. Knurled thumbscrews give a positive grip. Features magnetic base, upright post swivel, upright post, swivel snug, gauge rod, and indicator clamp. brbr Features: brbr ul liMagnet has 176 lbs. (80 Kg) holding power liV-Groove base allows mounting it on cylindrical surfaces /ul brbr Point Set: Choose the right end for your indicator to fit the surface from this 22 pc set. brbr Features: brbr ul li22 pc Popular assorted points in handy storage case /ul
*$32.99
Makita 785501-A-A 1/4-Inch Drive Impact Socket Set, 8-Piece
Brand: Makita   Model: 785501-A-A   Part Number: 785501-A-A
Includes 8-Piece 1/4 -in Impact Socket Set - 785501-A-A, (1) 3/16 -in Impact Socket, (1) 1/4 -in Impact Socket, (1) 5/16 -in Impact Socket, (1) 11/32 -in Impact Socket, (1) 3/8 -in Impact Socket, (1) 7/16 -in Impact Socket, (1) 1/2 -in Impact Socket, (1) 1/4 -in Socket Adapter
*$18.90
Metric 5 Pcs Ratchet Box Wrench Set
Brand: ProForge   Part Number: 2160D
Drop Forged Steel, Heat Treated, Chrome Finish 5.5mm, 6mm, 7mm, 8mm, 9mm,10mm, 12mm, 14mm, 15mm, 17mm Drop Forged Steel, Heat Treated, Chrome Finish
*$13.95
Klein Tool 918-30RE 30-Foot Power-Return Rule with Magnetic Dual-End Hook and Double-Sided Blade
Brand: Klein   Model: 918-30RE   Part Number: 918-30RE
918-30RE Klein Power-Return Rules. 30' x 1", Large magnetic dual-end hook allows for easier one-person measurements on ferrous metals. Large dual-end hook with double-sided blade for easy measrements, markings, and drawings. Comfortable rubber grip built into case for positive gripping and impact resistance. Positive blade lock holds plade securely in place. Oversized easy-to-read blade numbers. Tape measure holders available.
*$16.48
Maestro M1201 Clamp-All Clamp Set
Brand: Maestro   Model: M1201   
*$39.99
Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle, Stainless Steel Blade and Brass Fittings
Brand: Swanson   Model: TS149   Part Number: TS149
Hardwood handle. Etched stainless steel 9" Blade. Brass bound ends.
*$9.48
Tolman Tool HUB-CB Rebar Hub Cutter-Bender
Brand: Tolman Tool   Model: HUB-CB   
*$269.99
Robert Larson 540-7500 Coping Saw Blades for Wood
Brand: Robert Larson   Model: 540-7500   Part Number: 540-7500
High quality coping saw blades with pinned ends. Fits most coping saws old or new.
*$8.79
Steelex D2868 Needle Nose File Set, 10-Piece
Brand: Steelex   Model: D2868   Part Number: D2868
This Needle Nose File Set with vinyl grip handles includes ten profile shapes: round, half-round, flat, triangular, knife-edge, square and oval. All tips except the square nose flat file taper to a needle nose point for reaching into tight spots. Each file in the set measures 7" long.
*$7.50
Leatherman Diamond Coated Sharpening System - Leatherman 931004
Brand: Leatherman   Model: 931004   Part Number: 931004
Leatherman 931004 Diamond Coated Sharpening System Tube.
*$7.99
 
eBay Results
 TitlePriceShippingTotalCurrencyTime Left
25 ' Measuring Tape Rubber Grip SAE USA Made NEW3.490.003.49USD 30 minutes 36 seconds
Vintage Hargrave 10" Standard C Clamp9.9911.7021.69USD 30 minutes 47 seconds
NEW 12' COMBINATION TRI-SQUARE12.950.0012.95USD 31 minutes 45 seconds
Professional 3 Jaw Pilot Bearing Puller 1/2" to 1-1/2"7.998.9516.94USD 31 minutes 58 seconds
32 Pcs Professional Phone-Cover Open Screwdrivers Box1.497.498.98USD 32 minutes 20 seconds
ANTIQUE LEATHER WORKING TOOLS LEATHER CRAFT OLD TOOLS14.5010.0024.50USD 32 minutes 37 seconds
NEW RATCHET TYPE PVC PIPE CUTTER 1 5/8" CAPACITY SCH.400.996.907.89USD 32 minutes 55 seconds
Diagonal Wire Side Cutter Cutting Pliers Nippers 5"0.504.004.50USD 33 minutes 25 seconds
6pc SAE Socket Wrench Set Flex-Head Wrenches New Tools!8.996.0014.99USD 33 minutes 44 seconds
2 Double Suction Cup Pullers Auto Dent Carry GLASS New 9.9912.9922.98USD 33 minutes 53 seconds
Laser Level w/Measuring Tape8.993.9912.98USD 34 minutes 32 seconds
KLEIN TOOLS 1550-45 Coping Blade Pocket Knife FREE SHIP17.690.0017.69USD 35 minutes 53 seconds
KD Tools 3/8" Dr 9 Pc 6 Pt Metric Socket Set USA 912756.508.0014.50USD 36 minutes 2 seconds
Crown Tools MPB 3", 76mm Long Miniature Block Plane30.005.0035.00USD 36 minutes 30 seconds
NEW 4 PC PIPE WRENCH SET WITH COMFORT GRIP 11.9913.9425.93USD 36 minutes 50 seconds
Professional 6pc Metric Offset Wrenches w/Case! Tools!!8.997.9516.94USD 37 minutes 44 seconds
NEW Clear Hard Plastic RULER ~ INCHES & CENTIMETERS2.990.002.99USD 37 minutes 58 seconds
TWO CRAFTSMAN WRENCH HOLDER ( 9pc) SAE OR METRIC0.999.009.99USD 38 minutes 10 seconds
"NEW" QUICK FIST MINI RUBBER CLAMP TOOL ROD HOLDER 2.550.002.55USD 38 minutes 19 seconds
CRESCENT CTK70MP 70 PC MECHANICS TOOL SET WITH CASE39.9613.9553.91USD 38 minutes 41 seconds
Vintage Hargrave 8" Standard C Clamp9.9911.7021.69USD 39 minutes 49 seconds
KLEIN TOOLS 602-12 3/8" Keystone Screwdriver $4.95 S&H!15.004.9519.95USD 40 minutes 6 seconds
BLUEPOINT 3/8" DRIVE SOCKET SET! SNAP-ON CATALOG15.504.9520.45USD 40 minutes 44 seconds
4 SIZE RATCHETING AIR CONDITION SERVICE WRENCH TOOL0.995.906.89USD 41 minutes 18 seconds
Irwin 5 Pc. Bolt Extractor Remover Set - 1/2" Drive73.009.0082.00USD 41 minutes 19 seconds
LOT (2) 4" MAGNETIC PARTS TRAY~TOOL~AUTO~SHOP~PARTS9.993.3513.34USD 41 minutes 44 seconds
Professional 5pc Ratchet Adapter/Reducer Tools Sockets!4.996.0010.99USD 42 minutes 4 seconds
Complete 18-Tool Wood Carving Chisel Set - Canvas Case11.506.9918.49USD 42 minutes 13 seconds
SOCKET SET , 50pc , MADE BY STANLEY NEW34.9812.5147.49USD 42 minutes 19 seconds
Allen 12pc. TORX Int/External Bit & Socket Identifier2.503.005.50USD 42 minutes 45 seconds
SCREWDRIVER AND BIT SET BLACK AND DECKER NEW IN CASE4.996.9911.98USD 43 minutes 7 seconds
30pc METRIC GEARWRENCH STUBBY COMBINATION WRENCH SET12.5012.9525.45USD 43 minutes 58 seconds
BLUEPOINT 3/8" DRIVE METRIC SOCKET SET- SNAP-ON CATALOG50.264.9555.21USD 44 minutes 19 seconds
NEW (2) irwin jack 880 hand saws 20" 8t/9p6.000.006.00USD 44 minutes 53 seconds
DING KING DENT REPAIR KIT ORIGINAL AS SEEN ON TV NEW14.998.9923.98USD 46 minutes 29 seconds
BLUEPOINT NEW SPARK PLUG SOCKET SET! SNAP-ON CATALOG!5.504.9510.45USD 46 minutes 34 seconds
STRAIT-LINE ROLLING TAPE 300FT RANGE14.500.0014.50USD 47 minutes 28 seconds
4 Pc Screwdriver Set medium ones new in package0.015.005.01USD 47 minutes 48 seconds
6 Pc Screwdriver Set Large ones new in package0.016.506.51USD 47 minutes 51 seconds
Klein 7-Piece Nut-Driver Set- Metal Stand - 3" Shanks39.9512.7052.65USD 49 minutes 17 seconds
KLEIN TOOLS 630-5/8 Nut Driver 5/8 4" Shank FREE SHIP !14.960.0014.96USD 50 minutes 17 seconds
Wholesale Lot of 10 Mini Screwdriver Sets 6 in 112.490.0012.49USD 50 minutes 32 seconds
6 New F Bar Clamps 36" Woodworking Wood Cabinet Tools15.9919.9935.98USD 50 minutes 57 seconds
2PC PALM SNAP FINGER RATCHET SOCKET SET ON 1/4"/3/8" DR11.506.9518.45USD 51 minutes 47 seconds
6pc. TUBING CUTTER FLARING / BENDING TOOL KIT flare cut6.995.9912.98USD 52 minutes 13 seconds
MIT 36-PC NUMBER AND LETTER STAMP SET ~PROFESSIONAL~NEW9.996.9516.94USD 53 minutes 4 seconds
Black & Decker Automatic Adjustable 8" Wrench NEW15.996.7522.74USD 53 minutes 16 seconds
7 in 1 Tool Precision Electronics Screwdriver Set #2823.990.003.99USD 54 minutes 3 seconds
New 1,200LB Capacity Geared Hand Winch - Steel Cable6.9913.8020.79USD 54 minutes 18 seconds
ESTWING LEATHER WRAPPED HAMMER 16 OZ CLAW HAMMER 13.508.0021.50USD 54 minutes 54 seconds
 
Previous Page   Next Page
Jump to page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
Get eBay search results without all the crap at www.theDeCrapifier.com