 | 10" Fence Plier With Side Cutters
Brand: Raffael Tools Part Number: pli-f10-sc
- Drop Forgedbr - Heat Treatedbr - Cushion Gripbr - 2 Side Cutters br Weight: 1.85 Lbs | *$6.96 |
 | C.R. LAURENCE CN0004 CRL 115 Volt Solenoid for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0004
Easy to Replace Designed for the GL4W/CN4106 Sanders This CRL 115 Volt Solenoid is designed to fit the GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. Safety Note: Always unplug sander before attempting to replace any parts. | *$204.99 |
 | C.R. LAURENCE 2200785 CRL Belt Tightening Device Backstand Idler and Shaft
Brand: C.R. Laurence Part Number: 2200785
Used on Late Model Sanders This is the Same As 2200780 But Without the Pulley This CRL Belt Tightening Device is used on late model sanders with serial numbers in these series: 1071-1347 to 1071-1393, 1071-1421 to 1071-1493 and 1001 to current models. Image shows Backstand Idler and Pulley. | *$1,118.01 |
 | General Auger Coupler,1-3/8FH-7/8-SQ M #6000-4CLR
Brand: General Auger Part Number: 6000-4CLR | *$81.11 |
 | C.R. LAURENCE CRP7 CRL Axle for the CRP6 Roller
Brand: C.R. Laurence Part Number: CRP7
Used on the No. 200 Sander This CRL Axle for the Front Rest Replacement Roller is used on the Model 200 Sander. The front rest roller and axle with grease fitting supports glass during sanding. Roller and axle may also be used on some Somaca sanders. | *$16.60 |
 | C.R. LAURENCE 38533510 Somaca/CRL VE-1P Flat and Seam Edge Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence Part Number: 38533510
Spindle Peripheral Edger Wheel for VE1P Edger This Somaca/CRL 7" Diamond Wheel will grind a flat and seam profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on the VE1P edging machine. Dimensions: 7 in (178 mm) Grit: 140-170 | *$554.54 |
 | Universal Forest Products GEO680-99 Classic Lattice
Brand: Universal Forest Products Part Number: GEO680-99
Dimensions plastic lattice looks great, is tough, and lasts for years. Never needs painting. Won't show nicks or scratches because the color goes all the way through. Plastic lattice has the look of real wood without the disadvantages. 1 piece construction means there are no staples to rust or come apart. Unaffected by chemicals, moisture, insects, mildew, or rot. Plastic is completely recyclable and can be nailed, screwed, carved, sawed, and drilled. Unlike wood it won't split, separate, or splinter. Nominal thickness is 1 4'', spacing is 2 5 8''. | *$24.99 |
 | C.R. LAURENCE 30016600 CRL/Somaca Lower Pulley for BM106G Machine
Brand: C.R. Laurence Part Number: 30016600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 58 Quantity Required Per Machine: 1 | *$151.73 |
 | 5/8 Dia., 4. Grip Lg., Style "B", Hitch Pins (1 Each)
Brand: Wilson Part Number: LRP586
Styles A and C are made from heat treated steel and zinc plated. Style A has a swivel handle. Style B is a grade 5 forged pin made from heat treated high tensile steel, powder coated. Red vinyl coated head and handle. Style C is bent 15degrees. All pins are drilled and come with a zinc plated hitch pin. | *$8.82 |
 | C.R. LAURENCE FP2002 CRL Flat Platen
Brand: C.R. Laurence Part Number: FP2002
Fits Behind Belt Gives Glass a Flat Edge A CRL Flat Platen is used behind the belt to give glass a flat edge. For use on CRL 2200 Series and 100BM Sanders. Must be inserted into a CRL Platen Adapter on older models not equipped with mounting holes. | *$183.44 |
 | Special Products Co/ Farmex 03054 Replacement Top Link And Lift Arm Ball
Brand: Special Products Co/ Farmex Part Number: 03054
Designed to replace top link and lift arm balls. Zinc plated. No. 03054: Replaces John Deere model No. F2680 and Oliver model No. 105968A, pin hole size: 3 4", length thru bore: 1 3 4", ball diameter: 2" No. 03055: Replaces John Deere model No. F2681 and | *$4.61 |
 | C.R. LAURENCE CN0035 CRL Top Pulley Shaft and Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0035
Designed for CRL GL4W/CN4106 Sanders This CRL Top Pulley Shaft and Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools | *$112.65 |
 | C.R. LAURENCE 2200780 CRL Belt Tightening Device Backstand Idler and Pulley
Brand: C.R. Laurence Part Number: 2200780
Used on Late Model Sanders This CRL Belt Tightening Device is used on late model sanders with serial numbers in these series: 1071-1347 to 1071-1393, 1071-1421 to 1071-1493 and 1001 to current models. Image shows Backstand Idler and Pulley. | *$1,236.98 |
 | Pengo Auger Auger 4 X 36-IN 553297-7/8 #553297
Brand: Pengo Auger Part Number: 553297
Fits Ground Hog; All hubs include Standard #35 Tooth Inside and Out and SB-25 Pilot Bit; 4" auger includes a 4-1/2" screw bit. #35 teeth not used. | *$211.22 |
 | C.R. LAURENCE 2200 CRL 4 X 106 Wet Abrasive Belt Sander Without Roller Platen
Brand: C.R. Laurence Part Number: 2200
New Fiberglass Tank Won't Rust Rugged Construction and a One H.P. Direct-Drive Motor Also Available for Australia with 240 v. 50 Hz. Power Streamlined styling, rugged construction and the affordable price makes our CRL Upright Wet Belt Sander without Platen ideal for use by glass fabricators and processors. The CRL Wet Belt Sander is designed to use the most popular size four by 106 inches (101.6 by 2692.4 millimeters) wet or dry abrasive belts to sand edges to the desired finish. Features of the 2200 Sanding Machine include Direct drive, one H.P., 60 cycle, 110 Volt AC Motor Five Inch (127 millimeter) Diameter Drive Pulley Motor can be wired for 220 Volts at an additional cost. Our New CRL 2200SS Belt Guard Safety Shield helps protect the operator in the event of accidental belt breakage. To solve the problem of water tank spray corrosion, we've replaced the steel tank with a Non-Rusting Fiberglass Water Tank. Securely fastened with six mounting bolts, the tank is trimmed with rugged U-Channel. When you consider all of these features, it's easy to see why glass shops large and small have made the 2200 the glass industry's most popular Upright Belt Sander. For more information, or machine specifications, contact us at (888) 663-9830, or email us here . BELT SELECTION: CRL Wet Abrasive Belts in the four by 106 inch size are recommended for the 2200. The most popular are the: CRL4X106120X 120X Grit Smooth Finish, and Cat. No. CRL4X10680X 80X Grit Rough Finish, but other grits from 36X (Super Coarse) to 600X (Super Fine) are available for this machine, along with Cork Belts for high polishing. | *$2,614.94 |
 | C.R. LAURENCE 41910000 CRL/Somaca Solenoid Coil Parker Gold Ring # CFGC05 for BM106G Machine
Brand: C.R. Laurence Part Number: 41910000
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 38 Quantity Required Per Machine: 1 | *$114.69 |
 | Special Products Co/ Farmex 3110 Hitch Pin Clip
Brand: Special Products Co/ Farmex Part Number: 3110
Zinc plated spring wire. No. 03109: Wire diameter: 3 32", overall length: 1 5 8", fits pin diameter: 1 4" to 1 2", 12 per bag No. 03110: Wire diameter: 1 8", overall length: 1 15 16", fits pin diameter: 1 2" to 3 4", 8 per bag No. 03112: Wire diameter: 5 | *$1.48 |
 | Midwest Air Technologies 328568B Bullet Cap
Brand: Midwest Air Technologies Part Number: 328568B
For chainlink fence. Aluminum 2 3 8'' x 1 3 8''. No. 328569B: No way No. 328568B: 1 way No. 328567B: 2 way | *$1.86 |
 | C.R. LAURENCE 2000175 CRL Lower Pulley for the 200 and 2000 Sander - 7/8 Arbor
Brand: C.R. Laurence Part Number: 2000175
Used On Early Model 2000 Sanders Using a Westinghouse Motor This cast iron CRL Lower Pulley has a 7/8 inch (22.2 millimeter) arbor. Used on all early model 2000 Series Sanders using a Westinghouse motor. | *$214.82 |
 | C.R. LAURENCE 2402503 CRL/Somaca 8 x 12 Counterbalanced Tilting Cutting Table With Breaker Bar and Air Flow 12 Outlet
Brand: C.R. Laurence Part Number: 2402503
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill. | *$6,911.55 |
| | Mintcraft 10In Fence Plier SOU-FP103L
Brand: Soundbest Part Number: SOU-FP103L
Drop forged chrome nickel steel. Non-slip vinyl grip. | *$11.20 |
 | C.R. LAURENCE 0377010 CRL Panther Edger Motor Assembly
Brand: C.R. Laurence Part Number: 0377010
Designed for CRL's Panther Edger This motor is the workhorse of the CRL Panther Edging Machine. This one horsepower, single phase motor lasts almost indefinitely. Stocked and shipped out of Los Angeles only. Minimum Order: 1 Each | *$703.11 |
 | C.R. LAURENCE 2200720 CRL Single Spray Nozzle for 2200RP
Brand: C.R. Laurence Part Number: 2200720
Used on All 2200 Series Belt Sanders This CRL Water Spray Nozzle is used on all model 2200 and 2200RP wet belt sanders. Sprays belt with water to cut faster and cooler, reduce belt wear and eliminate sanding dust. Spray nozzle is also used on model 100BM belt sander. | *$18.90 |
 | C.R. LAURENCE 38517503 Somaca/CRL VE-1P Flat and Seam Edge Wheel for 1/4 to 1/2 Glass
Brand: C.R. Laurence Part Number: 38517503
Spindle Peripheral Edger Wheel for VE1P and PE11 Edgers This Somaca/CRL 7" Diamond Wheel will grind a flat and seam edge profile on 1/4 to 1/2 inch (6 to 12 millimeter) glass and is designed to run on these edging machines: VE1P, and PE11. Dimensions: 7 in (178 mm) Grit: 140-170 | *$729.39 |
| | Hitch Pins With Hairpin Lock - HAIR PIN LOCK 1" x 4-1/2"L.
Brand: Miller Part Number: 100H
Hitch Pins With Hairpin Lock - Precision machined, tough, case-hardened steel for longer wear. Heavy zinc plated resists rust. Pin-Lok hair pin assures positive hitch locking. 25/Box except 7/8" 1" | *$7.65 |
 | C.R. LAURENCE CN0039 CRL Lower Pulley for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0039
Designed for CRL GL4W/CN4106 Sanders This CRL Lower Pulley is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$214.41 |
 | C.R. LAURENCE 39234403 CRL/Somaca 6 Metal Bond Diamond Cup Wheel 140-170 Grit
Brand: C.R. Laurence Part Number: 39234403
140-170 Grit This Somaca/CRL 6" Metal Bond Diamond Cup Wheel is designed to run at position 2 on Model 761 High Speed Bevelling Machine. Diameter: 6 in (152.4 mm) | *$473.02 |
| | Hitch Pin Hair Pin Clips - 410X HITCH PIN .177 WIRE DIA.
Brand: Various Part Number: 410X
Hitch Pin Hair Pin Clips - Manufactured of Oil Tempered Spring Wire, Plated. 100/Pack. Ordering Information: * 223P - 3/64" size category, .042 wire diam, 3/64" drill hole size, 3/16" minimum shaft di | *$1.01 |
 | Columbus McKinnon M1226E E-Grip Hitch Pin
Brand: Columbus McKinnon Part Number: M1226E
Ergonomic design. Highest strength. Micro allow steel. Hot forged. Thru hardened heat treatment for strength properties. Supplied with hitch pin. Wide ergonomic handle. Big Orange. No. M1196E: 1 2" pin diameter, 3 1 2" useable length No. M1201E: 5 8" pin | *$8.00 |
 | GLADDON FOAM BOND SPRAY ADHESIVE 17 OZ. CAN
Brand: GLADON
SPRAY ADHESIVE 17 OZ. CAN | *$21.00 |
 | CRL 6" Diamond Glass Saw
Brand: C.R. Laurence Part Number: T6
Heavy-Duty, Sturdy Construction Rustproof Tank  Make straight and square cuts accurately and quickly with this CRL Diamond Saw. The saw works best on glass 1/4 inch (6.4 millimeter) thick, but can cut glass up to 1-1/2 inches (38 millimeters) thick. It is great for cutting super-hard cathedral glass or bullet-proof glass laminate strips up to five inches (127 millimeters) wide. The Blade has a diamond impregnated edge for neat, smooth cuts. There is also a solid plastic table top cutting surface measuring 15 by nine inches (381 by 229 millimeters) and unbreakable plastic drip tank which cleans out easily.  Additional Product Information: Specifications: 1/4 Horsepower Motor RPM - Variable from 400 to 3,400 110 Volts AC  Important Note: Diamond Blades not included with saw, and must be ordered separately.  | *$673.29 |
 | C.R. LAURENCE 39730201 Somaca/CRL 6 Diamond Flat Edge Cup 140-170 Grit for 1/8 to 1/2 Glass
Brand: C.R. Laurence Part Number: 39730201
140-170 Grit This Somaca/CRL 6" Diamond Cup Wheel will grind a flat edge profile on 1/8 to 1/2 inch (3 to 12 millimeter) glass and is designed to run on the VFE4 Cup Wheel Edger. Dimensions: 6 in (152.4 mm) | *$388.32 |
 | Special Products Co/ Farmex 15142 Draw Bar Hitch Pin
Brand: Special Products Co/ Farmex Part Number: 15142
Lox All Sta Pin is a positive locking hitch pin of premium grade cold rolled steel. Spring made of steel wire and swivels on head. All parts zinc plated and chromium lusterized to prevent rusting. 100% guaranteed. No. 15142: Pin diameter: 1 4", useable le | *$2.90 |
 | C.R. LAURENCE EAF CRL Counter Balance Table Air Flotation System
Brand: C.R. Laurence Part Number: EAF
Easy to Install on any Glass Cutting Table Positions Glass on a Cushion of Air Safely and Easily 110 Volt Electrical Requirement Improve your cutting table by installing air flotation. The CRL Counter Balance Table Air Flotation System is easy to install, and allows you to float, move and easily turn glass on the table top. Contains a self-contained blower system, hose, and 12 check ball outlets. Number of Outlets: 12 Electrical Requirement: 110 Volts F.O.B : Red Oak, TX | *$1,676.34 |
 | C.R. LAURENCE CN0037 CRL Roller Platen Shaft Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0037
Sealed Ball Bearings Designed for CRL GL4W/CN4106 Sanders This CRL Roller Platen Shaft Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$103.57 |
 | C.R. LAURENCE 2402504 CRL/Somaca 8 x 12 Counterbalanced Tilting Cutting Table With Breaker Bar
Brand: C.R. Laurence Part Number: 2402504
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill. | *$5,216.29 |
 | Battery Operated Fencers - BATTERY OPERATED FENCER
Brand: Hol-dem Part Number: S-21
Battery Operated Fencers - *Charges up to 10 miles of clean fence(12 volt) *UL Listed* Battery life: 12 volt approximately 3 to 4 weeks/6 volt approximately 4 to 5 weeks *Controls most animals. *Di | *$48.50 |
 | C.R. LAURENCE BP2001 CRL Bar Platen for the 2200 and 2200RP
Brand: C.R. Laurence Part Number: BP2001
Fits Behind Belt Gives Glass a Slightly Rounded Edge This CRL Bar Platen is used behind the belt to give glass a slightly rounded edge. Must be inserted into PA100 Platen Adapter located on your Upright Belt Sander . | *$186.43 |
 | C.R. LAURENCE 38709701 Somaca/CRL VE4 Flat and Seam Edge 120-140 Grit Grinding Wheel for 1/4 to 1/2 Glass
Brand: C.R. Laurence Part Number: 38709701
120-140 Grit Somaca/CRL VE4 Flat and Seam Edge Grinding Wheels are available for 1/8 to 3/4 inch (3 to 19 millimeter) thick glass and grits from 120 to 325. Dimensions: 7 in (178 mm) | *$663.93 |
 | Speeco Hitch Pin Clip Gold Dichromate Plating
Brand: SpeeCo Model: P7922ZJU Part Number: P7922ZJU
Speeco Hitch Pin Clip Gold Dichromate Plating Bulk Fits Hitch Pins 1/4-3/8 Dia 1/16 Wire All items sold new in original packaging | *$6.99 |
 | Columbus McKinnon M1225 Big Orange Wire Handle Hitch Pin
Brand: Columbus McKinnon Part Number: M1225
Hot forged pin. Micro allow steel. Folding wire handle. Easy to grip, easy to attach pull rope. Complete with hairpin lock. Orange painted. No. M1195: 1 2" pin diameter; 3 1 2" useable length, wire handle No. M1200: 5 8" pin diameter, 3 3 4" useable lengt | *$9.11 |
 | CRL 62" Replacement Diamond Coated Blade - DTB5000
Brand: C.R. Laurence Part Number: DTB101
For CRL Diamond Laser Band Saw This CRL Diamond Coated Replacement Blade is designed for use on the CRL DTB5000 Diamond Laser Band Saw . | *$193.16 |
 | C.R. LAURENCE 41900550 CRL/Somaca Parker Gold Ring OF20C-211OACF 1/4 Port for BM106G Machine
Brand: C.R. Laurence Part Number: 41900550
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 37 Quantity Required Per Machine: 1 | *$71.74 |
 | C.R. LAURENCE 0377031 CRL Panther Edger Replacement Ribbed Roller Bearing Bushing
Brand: C.R. Laurence Part Number: 0377031
Designed for CRL's Panther Edger Made for the CRL Panther Edger , this replacement CRL Ribbed Roller Bearing Bushing comes ready to install to help ensure smooth edger operation. Replacement invoves removing the old bearing with a press. | *$20.49 |
 | C.R. LAURENCE 2402500 CRL/Somaca 6 x 8 Counterbalanced Tilting Cutting Table
Brand: C.R. Laurence Part Number: 2402500
Indoor/Outdoor Carpet: Cushions Glass and Protects Against Scratches This Somaca/CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4 inch smooth particle board table top and carpet is included. F.O.B : Cicero, Ill. | *$3,463.81 |
 | C.R. LAURENCE 39579902 CRL/Somaca ME-II Orange Polish Wheel Double Wide
Brand: C.R. Laurence Part Number: 39579902
120 Grit Somaca/CRL ME-II Polish Wheels are available in Orange Polish and Rubber Polish for 1/8 inch to 1/2 inch thick glass. Dimensions: 8 in x 1-3/16 in (203 x 30.2 mm) Grit: 120 | *$134.37 |
 | C.R. LAURENCE 39234402 Somaca/CRL 6 Position # 1 Metal Bond Diamond Bevel Grinding Wheel 80-100 Grit
Brand: C.R. Laurence Part Number: 39234402
For Model 761 Straight Line Bevelling Machine This Somaca/CRL 6" Metal Bond Diamond Cup Wheel is mounted at position 1 on the 761 High Speed Beveller. Dimensions: 6 in (152.4 mm) Position : 1 | *$498.99 |
 | Ideal 35-828 Power Ship Auger, 1-1/8 Inch
Brand: Ideal Part Number: 35-828
Ideal 35-828 Nailbiter Power Ship Auger, 1-1/8 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-828 Nailbiter Power Ship Auger, 1-1/8 Inch Features:; 17 inches long with 12 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$27.99 |
 | Machinery Wire Fence Partition Door Post
Brand: Wireway Husky Part Number: G5506D
Machinery Partition Door Post Use these convenient door posts for easy installation of hinged door. 72"H x 2-12" sq. and 8" base. Bright yellow enamel finish. | *$82.95 |
 | CRL 10" Diamond Glass Saw
Brand: C.R. Laurence Part Number: T10
Heavy-Duty, Sturdy Construction Rustproof Tank This CRL 10 Inch Diamond Saw makes straight and square custs accurately and quickly. Works best on 1/4 inch (6.4 millimeter) thick glass, and will cut glass up to four inches (102 millimeters) in height. Great for cutting super-hard or bulletproof glass. There is a solid plastic table top cutting surface and unbreakable plastic drip tank which cleans out easily. Maximum strip cut is 2-3/4 inches (70 millimeters) wide using the included guide. Maximum freehand cut is 5-3/4 inches (146 millimeters). Specifications: 1/3 HP Motor 1,740 RPM 110v AC Plastic Table Top | *$1,239.17 |
